Loading ...
Loading ...
Loading ...
53
SNMP
You can set the SNMP function to get camera status, parameters and alarm related information and manage
the camera remotely when it is connected to the network.
Before setting the SNMP, please download the SNMP software and manage to receive the camera
information via SNMP port. By setting the Trap Address, the camera can send the alarm event and exception
messages to the surveillance center.
Figure 4-4-27 SNMP Settings
Table 4-4-16 Description of the buttons
Parameters Function Introduction
SNMP v1/2/3
The version of SNMP, please select the version of your SNMP software.
SNMP v1: Provide no security
SNMP v2: Require password for access
SNMP v3: Provide encryption and the HTTPS protocol must be enabled
Write Community Input the name of Write Community
Read Community Input the name of Read Community
Read Security Name Input the name of Read Security Community
Level of Security There are three levels available: (auth, priv), (auth, no priv) and (no auth, no priv)
Write Security Name Input the name of Write Security Community
Level of Security There are three levels available: (auth, priv), (auth, no priv) and (no auth, no priv)
SNMP Port The port of SNMP, the default is 161
Note:
1) The settings of SNMP software should be the same as the settings you configure here;
2) A reboot is required for the settings to take effect.
Loading ...
Loading ...
Loading ...