Loading ...
Loading ...
Loading ...
34
4.4.2 Image
Display information, enhancement of image and Day/Night setting can be set in this module. OSD (On
Screen Display) content and video time can be displayed to rich the image information.
Display
Figure 4-4-4 Display
Table 4-4-2 Description of the buttons
Parameters Function Introduction
Power Line Frequency 60HZ flicker for NTSC mode and 50HZ flicker for PAL mode
Day/Night Mode
There are several parameters such as Exposure Level, Maximum Exposure Time
and IR-CUT Interval, etc, associated with this mode
Night Mode: Shown in live view based on Night Mode settings
Day Mode: Shown in live view based on Day Mode settings
Auto Mode: Shown in live view based on environment, set the sensitivity for
switching Day Mode to Night Mode, or Night Mode to Day Mode
Customize: Shown in live view based on your own settings’ time to start/end
Night Mode
Day To Night Value
This is the sensitivity for switchingDay Mode toNight Mode. When IR Light
Sensor Current Value is lower than this value, it will switch Day Mode to Night
Mode
Night To Day Value
This is the sensitivity for switchingNight Mode toDay Mode. When IR Light
Sensor Current Value is higher than this value, it will switch Night Mode to Day
Mode
IR Light Sensor Value
The current value of the IR light sensor
Loading ...
Loading ...
Loading ...