Loading ...
Loading ...
Loading ...
Page 8
OPERATION
REMOTE CONTROL USAGE
Starting the rangehood for the rst time using
the remote control:
Put the safety switch ON (this switch is inside the
main rangehood). Wait about 5 seconds for the
circuit to test the memory.
1 2 3 4
The rangehood has a 4-speed remote control
device. The buttons have the following functions
(valid for all rangehood models with remotes):
A. ON / OFF button: This button turns the
rangehood on and o. The rangehood will
always be turned on at minimum speed.
B. High-speed button: This button increases
the aspiration speed.
C. Low-speed button: This button decreases
the aspiration speed.
NOTE: When increasing and decreasing the
speed of aspiration always wait for 2 seconds
after you have changed the speed to do so
again.
D. + button: Activates the deferred stop
function (after 10 minutes the rangehood will
automatically stop).
E. – button: Turns the rangehood lighting
on or o.
If the remote control fails or the batteries
run out, disconnect the rangehood using the
safety switch inside the rangehood (which can
be accessed from one of the lters) and replace
the batteries.
NOTE: To obtain the best performance, turn on
the rangehood a few minutes prior to cooking and
leave it on for at least 10–15 minutes after you
have nished cooking
A
B
C
DE
Loading ...
Loading ...
Loading ...