Loading ...
Loading ...
Loading ...
Page 12
CLEANING AND MAINTENANCE
TYPE 3 (LED Plate):
Replacing the LED Plate 11W
(Mod. Modular)
NOTE: Make sure the device is disconnected from
the electrical power supply.
Step 1
Open the door of the Paradigma hood. Remove the
lter and disconnect the light connector.
Your rangehood may have multiple light types, please refer to the pictures below for light replacement.
TYPE 1 (LED Spot) & 2 (GLED Square):
REPLACING THE LED BULB
The life span of an LED bulb is at least 10 times that
of a halogen bulb. If the globe needs to be replaced,
proceed as follows:
1. Unplug the respective connector (A).
2. Press the tabs (B) inside the rangehood.
3. Remove the LED.
4. Put in the new LED and reinstall, as above, but
in reverse order.
A A
B B
Type 1 — LED Spot Type 2 — GLED Square
Light
connector
Screws
Step 2
Remove the door by removing the screws.
WARNING
Always switch o and disconnect the power cord before replacing any light bulbs.
Failure to do so may cause serious injury. Please be aware that the light bulb will retain
heat for a short period of time after being switched o.
Loading ...
Loading ...
Loading ...