Loading ...
Loading ...
Loading ...
Page 17
INSTALLATION
INSTALLATION GUIDE FOR CC-INARTS AND CC-SURF2S
Before installing the rangehood, carefully open
the doors (D), then remove the lters (E). Release
power connection from the lighting incorporated in
the holder, then remove (C) the fascia.
1. On the ceiling, mark the outline of the
rangehood cut out, refer to gures 1 and 2
(on next page) for dimensions.
NOTE: It is always best to use the rangehood as
a cutting guide, not the cabinet cut out diagram
as this is only a guide.
2. Fit adjustable brackets (A1) to a solid structure
and adjust the (A1) brackets to the correct
height.
3. Fit the body of the rangehood (B) to the
adjustable brackets (A1).
4. Fix fascia (C) to the body hood (B) using the
screws supplied reconnect power connection
from the lighting incorporated in the holder.
5. Fix doors or glass doors (D) to the holder hinges
(C) using the screws supplied.
6. Close doors or glass doors (D) to x the holder
magnets.
A1 A1
B
C
D
E
Overview
Solid Structure
Ceiling or
Bulkhead
Note
We recommend using washable paint
for the ceiling where the rangehood
is installed.
Loading ...
Loading ...
Loading ...