Hikvision DS-K1T320EWX Quick Start Guide User Manual

Loading ...

Chapter 4 Wiring

You can connect the NC/NO and COM terminal with the door lock, connect the SEN and GND

terminal with the door contact and the BTN/GND terminal with the exit buon.

Note

●

If cable size is 18 AWG, you should use a 12 V power supply. And the distance between the

power supply and the device should be no more than 20 m.

●

If the cable size is 15 AWG, you should use a 12 V power supply. And the distance between the

power supply and the device should be no more than 30 m.

●

If the cable size is 12 AWG, you should use a 12 V power supply. And the distance between the

power supply and the device should be no more than 40 m.

●

The external card reader, door lock, exit buon, and door magnec need individual power

supply.

4.1 Terminal Descripon

The terminals contains power input and door lock.

The descripons of the terminals are as follows:

Table 4-1 Terminal Descripons

Group No. Funcon Color Name Descripon

Group A A1 Power Input Red +12 V 12 VDC Power

Supply

A2 Black GND Ground

Group B B1 Door Lock White/Purple NC Lock Wiring

(NC)

B2 White/Yellow COM Common

B3 White/Red NO Lock Wiring

(NO)

B4 Yellow/Green SENSOR Door Contact

B5 Black GND Ground

B6 Yellow/Grey BUTTON Exit Door

Wiring

DS-K1T320 Series Face Recognion Terminal User Manual

Loading ...

Hikvision DS-K1T320EWX Value Series Face Access Terminal