Loading ...
Loading ...
Loading ...
1000FLT
Users Manual
10
Pin Test
The Pin Test feature checks the continuity of the filament
between the pins. This is the default function when the
Product is turned on.
Make sure all other functions are off before you do a Pin
Test. should be the only button that is lit.
To test (see Table 6):
1. Turn on the Product.
2. Insert the lamp pins into the slots on the Product .
The green LED test indicator shows the filament is
good . You will hear a continuous beep if it is on.
No color on the LED test indicator shows that the
filament is broken .
Table 6. Pin Test
huz06.eps
Item LED Description
no LED Ready for Pin Test, default mode
solid green
Filament is good, continuous beep if the
beeper is on
no LED Filament is broken
2 3
1
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...