Loading ...
Loading ...
Loading ...
Fluorescent Light Tester
Controls
9
To test (see Table 5):
1. Turn on the Product.
2. Push for <1 second. The red light around the
button perimeter turns on and the LED test indicator
blinks red .
3. Rotate the Product with the VoltAlert end towards the
test object.
4. Move the VoltAlert to ≤10 cm (4 in) of the test object.
A solid red LED and a continuous beep (if beeper is
on) indicates that line voltage has been found .
The indicator continues to blink red if no line voltage is
found .
Note
The Product goes to the default Pin Test mode
after 30 seconds of non-use.
Table 5. Non-Contact Voltage Test
huz10.eps
Item LED Description
blinking red
- Test in progress/no voltage found
- Rotate VoltAlert end towards test
object
solid red
- Voltage found
- Continuous beep if the beeper is on
>1 sec
180˚
1 2
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...