Loading ...
Loading ...
Loading ...
AXIS 247S - System Options
26
Network - Advanced TCP/IP Settings
DNS Configuration
DNS (Domain Name Service) provides the translation of host names to IP addresses on your network.
Obtain DNS server address via DHCP - automatically use the DNS server settings provided by the DHCP
server. Click the View button to see the current settings.
Use the following DNS server address - enter the desired DNS server by specifying the following:
Domain name - enter the domain(s) to search for the host name used by the Video Server. Multiple domains
can be separated by semicolons (;). The host name is always the first part of a Fully Qualified Domain Name,
e.g. myserver is the host name in the Fully Qualified Domain Name myserver.mycompany.com where
mycompany.com is the Domain name.
DNS servers - enter the IP addresses of the primary and secondary DNS servers.
NTP
Obtain NTP server address via DHCP - use a DHCP server to automatically find an NTP server to synchronize
clock of the Video Server with the other devices on the network
Use the following NTP server address - use the host name or IP address of a specific NTP server for time
synchronization.
Host Name Configuration
The Video Server can be accessed using a host name, instead of an IP address. The host name is usually the
same as the assigned DNS Name.
For more information, please see the online help
Link-Local Address
This is enabled by default and assigns the Video Server an additional IP address for use with UPnP™. The Video
Server can have both a Link-Local IP and a static/DHCP-supplied IP address at the same time - these will not
affect each other.
HTTP
The default HTTP port number (80) can be changed to any port within the range 1024-65535. This is useful for
e.g. simple port mapping.
HTTPS
The default HTTP port number (443) can be changed to any port within the range 1024-65535. This is useful
for e.g. simple port mapping.
NAT traversal
Use NAT traversal when your video server is located on an intranet and you want to make it available from the
other side of a NAT router.
FTP
The FTP server running in the Video Server enables the upload of e.g. new firmware, user applications, etc.
Check the box to enable the service.
RTSP
The RTSP protocol allows a connecting client to start an MPEG-4 stream. Enter the RTSP port number to use.
The default setting is 554.
Network Traffic
The default setting is Auto-negotiate which means that the correct speed is automatically selected. If
necessary, you can set the connection speed by selecting it from the drop-down list.
Loading ...
Loading ...
Loading ...