Loading ...
Loading ...
Loading ...
Conventional Cruise Control
156
MT models:
• The shift lever is in the “1” or “R” position, or the shift lever has been in the neutral posi-
tion for approximately 5 seconds or longer.
- Conventional Cruise Control can be resumed after the shift lever is returned to a posi-
tion from “2” to “6”.
• The clutch pedal is depressed for approximately 5 seconds or longer.
• Vehicle speed drops to approximately 16 mph (25 km/h) or less (due to a steep uphill
grade or some other reason).
• Vehicle speed increases to approximately 100 mph (160 km/h) or more.
• Vehicle Dynamics Control or Traction Control Function is activated.
• Any door (except the trunk) is opened.
• The driver’s seatbelt is unfastened.
• Parking brake is applied.
• The EyeSight system has a malfunction. (EyeSight warning indicator: Yellow)
Page 161
• The steering wheel is turned significantly in either direction.
• The grade of the road is very steep.
• The Pre-Collision secondary braking is activated.
• The accelerator pedal was depressed continuously for a long time.
• The Vehicle Dynamics Control OFF mode is selected.
- Conventional Cruise Control can be resumed after Vehicle Dynamics Control has been
switched to the Vehicle Dynamics Control mode or TRACK mode.
• The engine speed increased to a high rpm.
B9062BE-A.book 156 ページ 2023年10月16日 月曜日 午後1時15分
Loading ...
Loading ...
Loading ...