Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/22283163-ds-k3g200lx/bg6.png)
have been swallowed or placed inside any part of the body,
seek immediate medical aenon.
•
If the product does not work properly, please contact your
dealer or the nearest service center. Never aempt to
disassemble the device yourself. (We shall not assume any
responsibility for problems caused by unauthorized repair or
maintenance.)
Cauons:
•
Stainless steel may be corroded in some circumstances. You
need to clean and care the device by using the stainless steel
cleaner. It is suggested to clean the device every month.
•
Do not drop the device or subject it to physical shock, and do
not expose it to high
electromagnesm radiaon. Avoid the
equipment
installaon on vibraons surface or places subject
to shock (ignorance can cause equipment damage).
•
Do not place the device in extremely hot (refer to the
specicaon of the device for the detailed operang
temperature), cold, dusty or damp locaons, and do not
expose it to high electromagnec radiaon.
•
The device cover for indoor use shall be kept from rain and
moisture.
•
Exposing the equipment to direct sun light, low
venlaon or
heat source such as heater or radiator is forbidden (ignorance
can cause
re danger).
•
Do not aim the device at the sun or extra bright places. A
blooming or smear may occur otherwise (which is not a
malfuncon however), and aecng the endurance of sensor
at the same me.
•
Please use the provided glove when open up the device cover,
avoid direct contact with the device cover, because the acidic
sweat of the
ngers may erode the surface coang of the
device cover.
•
Please use a
so and dry cloth when clean inside and outside
surfaces of the device cover, do not use alkaline detergents.
•
Please keep all wrappers
aer unpack them for future use. In
case of any failure occurred, you need to return the device to
the factory with the original wrapper.
Transportaon without
the original wrapper may result in damage on the device and
lead to addional costs.
•
Improper use or replacement of the
baery may result in
hazard of explosion. Replace with the same or equivalent type
only. Dispose of used
baeries according to the instrucons
provided by the baery manufacturer.
•
Biometric
recognion products are not 100% applicable to
an-spoong environments. If you require a higher security
level, use mulple authencaon modes.
•
Do not stay in the lane when the device is
reboong.
•
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT
TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE
INSTRUCTIONS.
v
Loading ...
Loading ...
Loading ...