Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/22283163-ds-k3g200lx/bg10.png)
By default, basic components of the turnsle are connected well.
The pedestals can communicate by wiring the interconnecng
cables. And the turnsle supports wiring the AC electric supply
for the whole system's power supply.
Note
The voltage uctuaon of the electric supply is between 100 VAC
and 240 VAC, 50 to 60 Hz.
The picture displayed below describes the serial port on the
entrance and exit direcon.
Figure 4-1 Serial Port
The picture displayed below describes each component's posion
on the turnsle.
Note
The diagram is for reference only.
Figure 4-2 Components Diagram 1
4.2 Wiring Electric Supply
Wire electric supply with the power switch or power adapter in
the pedestal. Terminal L (brown) and terminal N (Blue) are on the
switch, while terminal PE should connect to a ground wire (yellow
and green wire).
For product with power switch, the wiring diagram is as follows:
For product with power adapter, the wiring diagram is as follows:
4
Loading ...
Loading ...
Loading ...