Loading ...
Loading ...
Loading ...
English 95
Code Action
dF
Incorrect door switch.
• Call for service.
tC
Air temperature sensor problem
• Call for service.
tC5
The Thermistor2 resistance is very low or high.
• Check for a clogged lint screen.
• Check if the vent system is restricted.
• If this information code remains, contact a Samsung service center.
TCP
There is a problem with the relay overheat detection sensor on the PBA.
• Turn the machine off and restart the cycle.
• If the information code remains, contact a customer service center.
HCP
Abnormal overheating was detected on the relay on the PBA that controls the
heater.
• Unplug the dryer’s power plug.
• If the information code remains, contact a customer service center.
CLg
The vent is clogged.
1. Clean the lint filter.
2. Check your vent condition. (Refer to the “Ducting requirements” section)
* You must take measures (such as cleaning) through expert personnel.
If any information code keeps appearing on the screen, contact a local Samsung service center.
Untitled-1 95 2023-12-18() 5:49:41
Loading ...
Loading ...
Loading ...