Loading ...
Loading ...
Loading ...
Operations
English70
AI Pattern
This function saves frequently used cycles and settings. When you turn the function on, the washer
remembers the cycles you use most and their settings (Temp., Spin, and Soil) and displays them in
frequency order.
1. Tap WASHER, and then tap Options.
2. Turn the Navigation dial to select AI Pattern, and then tap OK.
3. Tap OK to select On or Off.
- The default setting is On. Set it to Off if you do not want to use this function.
- When you turn off the function, all the saved data resets.
My Cycles
Add or remove cycles to create a personal cycle list.
1. Tap WASHER, and then tap Options.
2. Turn the Navigation dial to select My Cycles, and then tap OK.
- You can only edit a cycle to create a personal cycle when the washer is not operating.
3. Turn the Navigation dial to select a desired cycle.
4. Tap OK to add or remove the selected cycle.
- Addition and removal of the course is saved automatically.
5. Once you finish creating My Cycles, tap Options to return to the cycles screen.
NOTE
• The Self Clean+ cycle cannot be removed from the cycles list.
• You can also edit My Cycles in the SmartThings app.
Calibration
You can run calibration again for accurate weight detection.
1. Tap WASHER, and then tap Options.
2. Turn the Navigation dial to select Calibration, and then tap OK.
- Calibration does not start if the door is not closed properly.
- The drum rotates clockwise and counterclockwise for about 3 minutes.
3. When calibration is complete, the "Calibration complete" message appears on the display and the
washer turns off automatically.
Self Diagnosis
You can run this function to diagnose the Laundry Hub washer.
1. Tap WASHER, and then tap Options.
2. Turn the Navigation dial to select Self Diagnosis, and then tap OK.
- Your Laundry Hub will run the self diagnosis process.
Untitled-1 70 2023-12-18() 5:49:37
Loading ...
Loading ...
Loading ...