Loading ...
Loading ...
Loading ...
Web-based Switch Configuration
61
2
2.7. Discovery
Use this section to configure LLDP.
2.7.1. LLDP
LLDP is a one-way protocol; there are no request/response sequences. Information is
advertised by stations implementing the transmit function, and is received and processed by
stations implementing the receive function. The LLDP category contains LLDP and LLDP-
MED pages.
2.7.1.1. Property
To display LLDP Property Setting web page, click Discovery > LLDP > Property.
Figure 68 - Discovery > LLDP > Property
Item
Description
State
Enable/ Disable LLDP protocol on this switch.
LLDP Handling
Select LLDP PDU handling action to be filtered, bridging or
flooded when LLDP is globally disabled.
âš« Filtering: Deletes the packet.
âš« Bridging: (VLAN-aware flooding) Forwards the packet to all VLAN
members
âš« Flooding: Forwards the packet to all ports
TLV Advertise Interval
Select the interval at which frames are transmitted. The default is
30 seconds, and the valid range is 5–32767 seconds.
Hold Multiplier
Select the multiplier on the transmit interval to assign to TTL
(range 2–10, default = 4).
Reinitializing Delay
Select the delay before a re-initialization (range 1–10 seconds,
default = 2).
Transmit Delay
Select the delay after an LLDP frame is sent (range 1– 8191
seconds, default = 3).
Fast Start Repeat Count
Select fast start repeat count when port link up (range 1–10,
default = 3).
Loading ...
Loading ...
Loading ...