Loading ...
Loading ...
Loading ...
Web-based Switch Configuration
145
2
Select the port ID(s) and click the “Edit” button to view the edit page.
Figure 154-2 - PoE > PoE Port > Edit PoE Port
Item
Description
Port
Display port ID of entry.
Control Status
select the enabled/disabled status of the PoE interface or PoE
Forcepower.
PoE Priority
select port power priority.
“Low” is lower priority;
“High” is high priority;
“Critical” is Critical priority.
PoE Limit
Enter max supply power value for the selected port list. The default is 32.
Note: Take extra care when using the PoE Forcepower mode, since no PD detection is
performed and power is automatically injected.
Use this mode only after you have made sure that either the PoE unit is connected to a
valid PD capable of receiving PoE power, or during the manufacturers testing.
If a port is disabled and then forced on, the port remains off until the port is enabled, and
only then is the port connected.
If a port was forced on and then disabled, the PoE system ignores the disable command
and returns an error report.
Loading ...
Loading ...
Loading ...