Loading ...
Loading ...
Loading ...
Introduction
3
1
Launching the Configuration Utility
To open the web-based configuration utility:
1. Open a Web browser.
2. Enter the factory default IP address of 192.168.0.250 in the address bar on the browser
and then press Enter.
When the device is using the factory default IP address, its power LED flashes
continuously. When the device is using a DHCP assigned IP address or an
administrator-configured static IP address, the power LED is lit a solid color. Your
computer’s IP address must be in the same subnet as the switch. For example, if the
switch is using the factory default IP address, your computer’s IP address can be in
the following range: 192.168.0.x (whereas x is a number from 2 to 254).
After a successful connection, the login window displays.
Figure 2 - Login Window
Loading ...
Loading ...
Loading ...