Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/2415949-gv-apoe2411-v2/bg89.png)
132
Click "Edit" button to view Edit Port Setting menu.
Figure 139 - Security > Dynamic ARP Inspection > Property>Edit Port Setting
Item
Description
Port
Display selected port to be edited.
Trust
Set checkbox to enable/disabled trust of interface. All ARP packet will
be forward directly if enable trust. Default is disabled.
Source MAC
Address
Set checkbox to enable or disable source mac address validation of
interface. All ARP packets will be checked whether sender mac is
same as source mac in Ethernet header if enable source mac address
validation. Default is disabled.
Destination MAC
Address
Set checkbox to enable or disable destination mac address validation
of interface. All ARP packets will be checked whether target mac is
same as destination mac in Ethernet header if enable destination mac
address validation. Default is disabled.
IP Address
Set checkbox to enable or disable IP address validation of interface.
All ARP packets will be checked whether IP address is 0.0.0.0,
255.255.255.255 or multicast address. Default is disabled.
IP Address –
Allow Zero
Set checkbox to enable or disable allow zero of IP address validation.
0.0.0.0 IP address is valid if allow zero enable. Default is disabled.
Rate Limit
Input rate limitation of ARP packets. The unit is pps. 0 means
unlimited. Default is unlimited.
Loading ...
Loading ...
Loading ...