Hikvision DS-2TD1117-6/PA User Manual

Loading ...

7.2.1 Recommended Scene

This part introduces the recommended scenes of re source detecon and helps you select the

appropriate scene.

Fire source

detecon can be applied to indoor and outdoor monitoring with a large detecon

radius. To achieve the best monitoring eect, please set the installaon place as requirements

below.

●

The installaon place should be the highest posion within the detecon area. The lens should

not be covered during movement to detect the maximum area.

●

It is beer to choose the installaon place with convenient trac, well-equipped power and

internet facilies (e.g., communicaon tower, watchtower and high-rise roof).

7.2.2 Set Dynamic Fire Source

Detecon

To avoid the potenal re damage, you can congure the re detecon funcon for certain areas.

The detail conguraon steps show as below.

Before You Start

Go to

Conguraon → System → Maintenance → VCA Resource Type , select Temperature

Measurement + Perimeter Protecon.

Steps

Go to Conguraon → Local .

Check Locate Highest Temperature Point to display the

posion of highest temperature. Check

Frame Fire Point to frame the re source on live view.

Go to Conguraon → Event → Smart Event , select Dynamic Fire Source Detecon.

Check Enable Dynamic Fire Source

Detecon.

Set the parameters of re detecon.

Fire Source Detecon

Smoking Mode

Detect smoking behavior in the scene.

Dynamic Fire

Detect the dynamic re source in the scene.

Sensivity

The sensivity of re detecon. The bigger the value is, more easily the re source can be

detected, and the false rate is higher.

Alarm Interval

Set the alarm interval between two alarms.

Picture Quality

Thermal Network Camera User Manual

Loading ...

Hikvision DS-2TD1117-6/PA Thermal Network Turret Camera