Hikvision DS-2TD1117-6/PA User Manual

Loading ...

Steps

Go to Conguraon → Temperature Measurement & Fire Prevenon → Basic Sengs , check

Enable Temperature Measurement.

Refer to

Set Thermography Parameters to set the parameters.

Go to

Conguraon → Temperature Measurement & Fire Prevenon → Advanced Sengs ,

select Expert.

Select and enable the temperature measurement rules. Please refer to

Set Thermography Rule

for seng the rule.

Oponal: Click Area's Temperature Comparison to set the alarm rules and the temperature.

Click Save.

The maximum temperature and thermography rules will be displayed on the live view.

Note

Go to Image → VCA Rules Display to adjust the font size and the temperature color of normal,

alarm and pre-alarm.

Enable the scan funcon of device, such as linear scan to monitor the scene.

Set Thermography Rule

Steps

Customize the rule name.

Select the rule type to Point, Line, or Area. Then draw a point, line, or area on the interface

where the

posion to be measured.

Point

Please refer to Point Thermography for detailed conguraon.

Line Please refer to Line Thermography for detailed conguraon.

Area Please refer to Area Thermography for detailed conguraon.

Congure the temperature measurement parameters.

Emissivity

Set the emissivity of the target. The emissivity of the surface of a material is its eecveness

in eming energy as thermal radiaon. Dierent objects have dierent emissivity. Refer to

Common Material Emissivity Reference to search for the target emissivity.

Distance

The distance between the target and the device.

Reecve Temperature

If there is any object with high emissivity in the scene, check and set the reecve

temperature to correct the temperature. The reecve temperature should be set the same

as the temperature of the high emissivity object.

Click and set the Alarm Rule.

Alarm Temperature and Pre-Alarm Temperature

Thermal Network Camera User Manual

Loading ...

Hikvision DS-2TD1117-6/PA Thermal Network Turret Camera