Hikvision DS-2TD1117-6/PA User Manual

Loading ...

Note

Please refer to the Quick Start Guide for detailed informaon of Installaon part in the ow chart.

7.1.3 Automac Thermography

Congure the temperature measurement parameters and temperature measurement rules. The

device can measure the actual temperature and output alarms when temperature exceeds the

alarm threshold value.

Set Thermography Parameters

Congure the parameters of temperature measurement.

Steps

Go to

Conguraon → Local , enable Display Temperature Info.

Click Save.

Go to Conguraon → Temperature Measurement & Fire Prevenon → Basic Sengs to

congure parameters.

Enable Temperature Measurement

Check to enable temperature measurement funcon.

Enable Color-Temperature

Check to display Temperature-Color Ruler in live view.

Display Temperature Info. on Stream

Check to display temperature informaon on the stream.

Display Temperature in Opcal Channel

Check to display thermal channel temperature informaon in the opcal channel.

Display Max./Min./Average Temperature

Check to display maximum/minimum/average temperature

informaon on liveview when the

temperature measurement rule is line or area.

Rule Name

Display the rule name rather than the rule ID on the live view. You can set the name in expert

temperature measurement mode for the rule.

Posion of Thermometry Info

Select the posion of temperature informaon showed on the live view.

●

Near Target: display the informaon beside the temperature measurement rule.

●

Top Le: display the informaon on the top le of screen.

Add Original Data on Capture

Thermal Network Camera User Manual

Loading ...

Hikvision DS-2TD1117-6/PA Thermal Network Turret Camera