Loading ...
Loading ...
Loading ...
Monitor • User Manual
11
If Overscan is enabled, you can set the value of the top/bottom/left/right edge. The value indicates
the covered units of different directions.
Overscan
Overscan Parameters
Parameter
Description
Overscan
Off/On
Left Edge
Ranges from 0 to 100.
Right Edge
Ranges from 0 to 100.
Top Edge
Ranges from 0 to 100.
Bottom Edge
Ranges from 0 to 100.
Scale up/down the image. Three kinds of aspects are available: 16:9, 4:3, and point to point.
Point to Point mode is only available when a VGA or HDMI signal is accessed.
When no need to use keypad or the installation environment may extrude the keypad, you can set
the Keypad as Off to lock it.
Loading ...
Loading ...
Loading ...