Loading ...
Loading ...
Loading ...
7
User maintenance instructions
This appliance requires little maintenance. It contains no user serviceable parts.
Do not try to repair it yourself. Contact a qualied appliance repair technician if the product
requiresservicing.
Care & Cleaning Instructions
CAUTION: Unplug from electrical outlet and allow to cool thoroughly before cleaning
orstoring.
1. The Wafe Maker does not disassemble for cleaning.
2. Never immerse appliance in water or other liquids. Never place Wafe Maker in dishwasher.
3. The wafe cooking plates should be cleaned and conditioned before each heating.
4. Brush cooking plates with a clean, soft pastry brush or cloth.
5. To condition plates, lightly coat cooking surfaces with solid vegetable shortening or vegetable oil.
6. Carefully follow suggested cleaning procedures described below. After a time, if wafes show signs
of sticking, recondition as needed.
7. To protect the non-stick surfaces, use only plastic, nylon or wooden utensils.
8. To remove any batter baked onto the cooking plates, pour a small amount of cooking oil onto
thehardened batter. Allow to set for 5 minutes, then wipe softened batter off with a paper towel
or soft cloth. Remove stubborn stains with a plastic mesh puff or pad. For best results, use only
products with directions stating they are safe for cleaning non-stick cooking surfaces.
Do not use steel wool or coarse scouring pads as metal will damage the cooking plates.
9. The exterior nish should be cleaned with a non-abrasive cleaner and a soft, damp cloth.
Drythoroughly.
Storing Instructions
1. Make sure unit is unplugged and fully cooled.
2. Secure the lid shut with the latch.
WARNING: Never store Wafe Maker while
it is hot or still plugged in.
3. Do not put any stress on cord where it enters unit,
as this could cause cord to fray and break.
4. Store Wafe Maker in its box or stand unit on its end
for easy and compact storage.
Figure 2
17264_BELLA_4 Waffle Square_IM_R0.indd 717264_BELLA_4 Waffle Square_IM_R0.indd 7 2021-01-14 1:03 PM2021-01-14 1:03 PM
Loading ...
Loading ...
Loading ...