Loading ...
Loading ...
Loading ...
26
TROUBLESHOOTING
WARNING!
Tampering with the washer could pose a risk to life from electric shock, damage the washer
and void warranty claims.
- Do not make any modifications to the washer.
The following table provides assistance in the event of malfunctions. If the solutions provided
here are unsuccessful, contact the manufacturer or an authorised service centre at the service
address specified on the warranty card.
Fault/
malfunction
Cause Remedy
Device does not
work.
The power supply is interrupted.
Check the power connection,
mains cord and fuse; have repairs
performed by an electrician if
necessary.
The washer is switched off. Move the ON/OFF switch to ON.
Device does not
work.
Individual components are
defective.
Contact the manufacturer or an
authorised service centre at the
service address specified on the
warranty card.
Washer is working,
but keeps
cutting out.
The mains cord is damaged.
Contact the manufacturer or
an authorised service centre
at the service address
specied on the warranty
card.
An internal electrical connection
has become loose.
The ON/OFF switch is defective
No pressure or only
slight
pressure is built up.
There is air in the washer.
Operate the washer without con-
necting the spray gun until the water
is dispensed without bubbles.
There is no water or an
insufcient supply of water.
Check your water connection.
Check the water inlet hose for leaks
or blockage.
The dirt lter is clogged.
Clean the dirt lter; see chapter
“Cleaning the dirt lter”.
The washer draws in air.
Check for leaks in the water inlet
hose
Loading ...
Loading ...
Loading ...