Loading ...
Loading ...
Loading ...
20
INSTALLATION
Assembly the accessories (Fig. C)
1. Install the cord hook onto the housing left side
2. Install the gun holder on the front housing.
3. Install the extension lance on the front decorating panel.
WARNING!
Rist of injury!
The washer could be inadvertently activated and cause injury.
- Ensure that the washer is disconnected from the mains before you assemble the washer.
WARNING!
Health hazard!
The washer must not be directly connected to the drinking water
network because the return flow of water poses a risk to the drinking
water.
- Use a water backflow preventer or an inlet hose set approved in accordance with IEC
61770.
- Cleaning car motors and other objects contaminated by oil and various lubricants is
permissible only on such areas where the waste water is diverted by an oil separator.
- Water that has flowed through the backflow preventer is considered unfit for drinking.
1. Insert the plug connection of the high-pressure hose in the connection on the handle of
the spray gun. (Fig. D&E)
2. Insert any given cleaning nozzle onto the spray gun. See chapter “Using the cleaning
attachments”.
3. Connect a water inlet hose with a quick-lock coupling (not included in the package
contents) with the screw connection for the water inlet hose. The water temperature may
amount to no more than 40 °C. (Fig. J&K)
4. Insert the mains plug into a properly installed socket with an earthing contact and
alternating voltage in accordance with the washer’s rating plate. (Fig. L)
Starting the washer
NOTE!
Risk of damage!
Improper handling of the washer may result in damage to the washer.
- Familiarise yourself with all control elements before starting up the washer. Before each
use, make sure that the washer is functional.
- Ensure that all parts of the washer are securely attached.
- Ensure that the water connection and the high-pressure hose are not leaking.
Loading ...
Loading ...
Loading ...