Loading ...
Loading ...
Loading ...
52
Cleaning and maintenance
Filling the reservoir with clean water
(St5)
1) Clean the reservoir and fill the left filling
compartment with clean water up to the
MAX level.
2) Place the reservoir in the oven
compartment and close the lid.
3) Press the SET button to confirm.
Rinsing the water circuit (St6)
1) The appliance starts the water circuit
cleaning procedure and the display
shows the entire duration of the
procedure.
2) At the end of the rinse cycle,
End
is shown on the display and a buzzer
sounds.
3) Press the START/STOP button for
at least 3 seconds to exit from the
descaling function.
Seal maintenance
The seal should be soft and elastic.
To keep the seal clean, use a non-abrasive
sponge and wash with lukewarm water.
Replacing the internal light bulb
Caution
• Unplug the appliance.
• Use protective gloves.
• Let the appliance cool down.
1) Completely remove all accessories
from inside the oven.
2) Unscrew the bulb cover by hand and
remove it.
Pay attention not to scratch the
oven cavity enamel.
3) Slide out and remove the light bulb.
4) Reinstall the protective cover after
replacing the bulb.
Loading ...
Loading ...
Loading ...