Loading ...
Loading ...
Loading ...
45
4.5.10 Face Detection
Face detection function is to detect the face appearing in the surveillance scene. Alarms will
be triggered when a face is detected.
The setting steps are as follows:
1. Go to Config→Event→Face Detection as shown below.
2. Enable the face detection function.
Save Source Information to SD Card: if checked, the whole picture will be saved to the local
PC or SD card when detecting a face.
Save Face Information to SD Card: if checked, the captured face picture will be saved to the
local PC or SD card when detecting a face.
Note: To save images to the local PC, please enable the local smart snapshot storage
first (Config→System→Local Config). To save images to the SD card, please install an
SD card first.
3. Set alarm holding time and alarm trigger options. The alarm trigger setup steps are the
same as motion detection setup. Please refer to 4.4.1 Motion Detection chapter for
details.
Trigger alarm condition: all or mask off can be selectable.
⚫ All: Alarms will be triggered when the camera detects a face (with/without a mask).
⚫ Mask off: Alarms will be triggered when the detected person is not wearing a mask on the
face.
Loading ...
Loading ...
Loading ...