Loading ...
Loading ...
Loading ...
16
Sharpness: Set the resolution level of the image plane and the sharpness level of the image
edge.
Noise Reduction: Decrease the noise and make the image more thorough. Increasing the
value will make the noise reduction effect better but it will reduce the image resolution.
Defog: Activating this function and setting an appropriate value as needed in foggy, dusty,
smoggy, or rainy environment to get clear images.
Auto Iris: If your camera is equipped with auto Iris lens, please enable it.
Backlight Compensation (BLC):
⚫ Off: Disables the backlight compensation function. It is the default mode.
⚫ HWDR: WDR can adjust the camera to provide a better image when there are both
very bright and very dark areas simultaneously in the field of the view by lowering the
brightness of the bright area and increasing the brightness of the dark area.
⚫ HLC: Lowers the brightness of the entire image by suppressing the brightness of the
image’s bright area and reducing the size of the halo area.
⚫ BLC: If enabled, the auto exposure will activate according to the scene so that the
object of the image in the darkest area will be seen clearly.
Recording will be stopped for a few seconds while the mode is changing from non-WDR to
WDR mode.
Antiflicker:
⚫ Off: disables the anti-flicker function. This is used mostly in outdoor installations.
⚫ 50Hz: reduces flicker in 50Hz lighting conditions.
⚫ 60Hz: reduces flicker in 60Hz lighting conditions.
White Balance: Adjust the color temperature according to the environment automatically.
Day/Night Mode: Choose “Auto”, “Day”, “Night” or “Timing”.
Shutter Mode: Choose “Auto” or “Manual”. If manual is chosen, the digital shutter speed can
be adjusted.
Gain Mode: Choose “Auto” or “Manual”. If “Auto” is selected, the gain value will be
automatically adjusted (within the set gain limit value) according to the actual situation. If
“Manual” is selected, the gain value shall be set manually. The higher the value is, the brighter
the image is.
Lens Distortion Correction: When the image appears distortion to some extent, please
enable this function and adjust the level according to the actual scene to correct the distortion.
Frequency: 50Hz and 60Hz can be optional.
HFR: High Frame Rate. If “ON” is selected, the system will restart and the maximum value of
the frame rate of the main stream can be set to 60 fps / 50 fps.
Corridor Pattern: Corridor viewing modes can be used for situations such as long hallways. 0,
90, 180 and 270 are available. The default value is 0.
Image Mirror: Turn the current video image horizontally.
Loading ...
Loading ...
Loading ...