Loading ...
Loading ...
Loading ...
AXIS Q1604–E Network Camera
System Options
• the default router
• the subnet mask
•thesystemtime
• the IEEE 802.1X settings
• the focus pos ition
Click Default to reset a ll settings, including the IP address, to the factory default values. This button should be used with caution. The
Axis product can also be reset to factory default using the control button, see
Reset to factory default settings, on page 45
.
To identify the product or test the Status LED, click Flash LED under Identify and specify the duration in seconds, minutes or hours.
This can be useful for identifying the product among other products installed in the same location.
For information about firmware upgrade, see
Upgrading the firmware, on page 4 7
.
Support
Support Overview
The System Options > Support > Support
Overview page provides information on troubleshooting and contact information,
should you require technical assistance.
See also
Troubleshooting, on page 47
.
System Overview
To get an overview of the Axis product’s status and settings, go to System Options > Support > System Overview. Information that
can be found her
eincludesfirmware version, IP address, network and security settings, event settings, image settings and recent log
items. Many of the captions are links to the proper Setup p age.
Logs & Reports
The System Options > Support > Logs & R eports page generates logs and reports useful for system analysis and troubleshooting. If
cont
acting Axis Support, please provide a valid S erve r Report with your query.
S
ystem Log - Provides information about system events.
Access Log - Lists all failed attempts to access the product. The Access Lo g can also be configured to l ist all connections to the
product (see below).
44
Loading ...
Loading ...
Loading ...