Loading ...
Loading ...
Loading ...
AXIS Q1604–E Network Camera
Events
Events
The Axis product can be configured to perform actions when different events occur, for example, start a recording w h e n motion is
detected. The set of conditions that defines how and when the action is triggered is called an Action Rule.
Available Action Rule triggers and conditions include:
• Applications — use installe d applications to trigger the rule, see
Applications, on page 30
.
• Detectors
- Audio Detection — trigger the rule when audio is detected, see
Audio detection, on page 29
.
- Motion Detection — trigger the rule when motion is detected, see
Motion Detection, on page 28
.
- Tampering — t rigger the rule when tampering is detected , see
Camera Tampering, on page 28
.
• Hardware
- Network — trigger the rule if network connection is lost or restored. This can for example be used to start
recording to the SD card.
• Input Signal
- Digital Input Port — trigger the rule when an I/O port receives a signal from a connected device, see
I/O
Ports, on page 43
.
- Manual Trigger — trigger the rule using the Manual Trigger button in the Live View page, see
Controls on the
Live View page, on page 13
. This can for example be used to validate actions during product installation
and configuration.
• Storage
- Available — trigger the rule when the storage device is unmounted or rem oved. This can for example be
used to send maintenance notifications.
- Full — trigge r the rule when the storag e device is full. Under normal op eration, the olde st recordings will be
overwritten to prevent the storage device from b
ecoming full.
- Locked —triggertheruleifthe
storage device is locked (write pro tected).
• System
- System Initializi
ng — trigge r the rule when the product is being started. Thi s can for example be used to send a
notification when the pro duct restarts.
• Time
- Recurrence — trigger the rule periodically, see
Recurrences, on page 33
. This can for example be used to
upload an image every 5 minutes.
- Use Schedule — trigger the rule according to the s elected schedule, see
Schedules, on page 33
.
Available actions include:
• Day/Night Vision Mode —setdaymode(IRcutfilter on) or night mode (IR cut fi lter off).
• Output Port — activate an I /O port to control an external device.
• Play Audio Clip —see
Audio Clips, on page 25
.
• Record Video — record video to a selected storage.
• Send Images —sendimagestoarecipient.
31
Loading ...
Loading ...
Loading ...