Loading ...
Loading ...
Loading ...
Unobstructed ventilation shall be maintained around the appliance or in an embedded structure.
Preparations for use
1. Standing time
After the refrigerator is properly installed and well cleaned, do not switch it on immediately. Make sure to energize the
refrigerator after more than 1 hour of standing, so as to ensure its normal operation.
2. Cleaning
Confirm the accessory parts inside the refrigerator and wipe the inside with a soft cloth.
3. Power-on
Insert the plug into the solid socket to start the compressor. After 1 hour, open the freezer door, if the temperature inside
the freezer compartment drops obviously, it indicates the refrigeration system is working normally.
4. Storage of food
After the refrigerator runs for a period of time, the internal temperature of the refrigerator will be automatically controlled
according to the user’s temperature setting. After the refrigerator is fully cooled, put in foods, which usually need 2~3
hours to be fully cooled. In summer, when the temperature is high, it takes more than 4 hours for the foods to be fully
cooled (Try to open the refrigerator door as less as possible before the internal temperature cools down).
If the refrigerator is installed in the moisture place, make sure to check whether the ground wire and leakage circuit
breaker are normal. If vibration noises are produced due to the refrigerator contacting the wall or if the wall gets blackened
by air convection around the compressor, move the refrigerator away from the wall. Setting up the refrigerator may cause
jamming noise or image chaos to the mobile phone, fixed-line telephone, radio receiver, television set surrounding it, so
try to keep the refrigerator as far away as possible in such case.
Functions
The display panel is designed on the fridge door, illustrated as the figures below:
Function Setting
When the refrigerator system is connected to power supply for the first time, all icons on the
display panel gets illuminated for 5s. When the refrigerator door is close, the display gets
extinguished automatically if no key operation within 3 minutes. When the display is off, it will
up if refrigerator door is opened or any key is pressed.
The following key operations are valid only when keys are unlocked and gets illuminated on the
display.
1.Functions
1.1 Temp. setting
1）Fridge temperature setting
Press the “Fridge” key to adjust the fridge temperature to the expected temperature value,
then press the "OK" key within 5 seconds to validate the setting, with the flickering of the
current temperature setting stopped.
The fridge temperature setting cycles as following:
5℃→6℃→7℃→8℃→OF→2℃→3℃→4℃→5℃
‘OF’ represents the OFF state, and when the OF setting takes effect, the fridge will be shut off,
with no refrigeration request.
Be sure to take out all the foods in the fresh food compartment before setting this function.
2）Freezer temperature setting
Press the Freezer key to adjust the freezer temperature to the expected temperature value,
and then press the "OK" key within 5 seconds to validate the setting, with the flickering of the
current temperature setting stopped.
The freezer temperature setting cycles as following:
-18℃→-17℃→-16℃→-24℃→-23℃→-22℃→-21℃→-20℃→-19℃→-18℃；
3）Care+ temperature setting
Press the Care+ key to adjust the temperature of the Care+ temperature space, until the expected temperature mode is
set, and then press the "OK" key within 5 seconds to validate the setting, with the flickering of the current mode indicator
stopped.
The temperature modes of the Care+ temperature space cycle as following:
Vegetables → Fruit → Chill → Vegetables;
1.2 ECO
Loading ...
Loading ...
Loading ...