Loading ...
Loading ...
Loading ...
772/773 English Instruction Sheet
Page 8
User Options
Several user options can be activated at Meter power up. Hold N
when powering on the Meter. While holding down N, toggle on/off
each option by repeatedly pressing the following keys:
• Q toggle on/off backlight auto off. Display shows bLit on or oFF.
• A toggle on/off spotlight auto off. Display shows SLit on or oFF.
• H toggle on/off auto power off. Display shows PoFF on or oFF.
When all key are released, the software version appears and the Meter
enters Clamp Measure mode.
Measurement Spotlight LED
The Measurement Spotlight LED helps to quickly find mA signal wires.
Press A to activate it. To extend battery life, the light automatically turns
off after 2 minutes.
Display HOLD
XW Warning
To avoid electric shock, be aware of the measurement
being taken when using Display HOLD. When Display
HOLD is activated, the display will not change when
different currents are applied.
Press H to activate Display Hold mode. The display shows I and
the display freezes. To exit and return to normal operation, press H a
second time. When in Auto Ramping mode, H stops ramping.
Auto Ramping the Output
Auto ramping can continuously apply a varying output from the mA
source to a device while your hands remain free to test the response.
When K is pressed, the Meter produces a repeating 0 % - 100 % -
0 % ramp in a choice of three ramp waveforms:
• () 0 % - 100 % - 0 % 40-second smooth ramp
• () 0 % - 100 % - 0 % 30-second smooth ramp
• () 0 % - 100 % - 0 % 25 % step ramp, 10 seconds each step.
To exit ramping, press any button.
Probe Holder
The Meter is equipped with a probe holder that can either hold a test
probe or can be used to attach the Fluke ToolPak. See Figure 5.
Fjv08.eps
Figure 5. The Probe Holder
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...