Loading ...
Loading ...
Loading ...
772/773 English Instruction Sheet
Page 4
Getting Acquainted with the Meter
Figures 1-4 explain the Meter’s features, buttons, input/output jacks, and
display.
HART
mA SCALELOOP PWR
mA IN/OUT
3
9
10
11
1
4
5
6
7
8
2
Fjv06.eps
Number Description
A Turns the Meter on and off
B Measurement spotlight LED button
C Turns the display backlight on and off
D
Switches the Meter to Clamp Measure mode. Zeros the clamp
reading in Clamp mode. The Clamp modes includes clamp
measure, mA scale output, and mA IN/OUT.
Press N first to change to mA scale (773).
E
Cycles through source output ramping and 25 % stepping:
() Slow repeating 0 % - 100 % - 0 % ramp
() Fast repeating 0 % - 100 % - 0 % ramp
() Repeating 0 % - 100 % - 0 % ramp in 25 % steps
Press N first to activate mA IN/OUT (773).
F
Captures and holds the current reading. Pressing N first
activates the 250 Ω HART resistor.
G N activates features listed above some buttons
H
0 %-100 %- sets voltage or mA sourcing output. Press N first to
activate U, V, X, and W to adjust the source output. Long press
G or D to set span range point.
I Measure, Source, Simulate button
J DC Volts selection (773)
K mA selection. Press N first to activate Loop Power function.
Figure 1. Buttons
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...