Loading ...
Loading ...
Loading ...
DS-K1A8503 Series Fingerprint Time Attendance Terminal User Manual
59
6.5 Configure Advanced Functions
You can configure the advanced functions of access control to meet some special requirements in
different scene.
Note
● For the card related functions(the type of access control card), only the card(s) with access
group applied will be listed when adding cards.
● The advanced functions should be supported by the device.
● Hover the cursor on the Advanced Function, and then Click to customize the advanced
function(s) to be displayed.
6.5.1 Configure Device Parameters
After adding the access control device, you can configure the parameters of access control device,
access control points.
Configure Parameters for Access Control Device
After adding the access control device, you can configure its parameters.
Steps
1. Click Access Control → Advanced Function → Device Parameter.
Note
If you can find Device Parameter in the Advanced Function list, Hover the cursor on the
Advanced Function, and then Click to select the Device Parameter to be displayed.
2. Select an access device to show its parameters on the right page.
3. Turn the switch to ON to enable the corresponding functions.
Note
● The displayed parameters may vary for different access control devices.
● Some of the following parameters are not listed in the Basic Information page, click More to
edit the parameters.
Voice Prompt
If you enable this function, the voice prompt is enabled in the device. You can hear the voice
prompt when operating in the device.
Press Key to Enter Card Number
Loading ...
Loading ...
Loading ...