Loading ...
Loading ...
Loading ...
DS-K1A8503 Series Fingerprint Time Attendance Terminal User Manual
101
enter the DST tab.
Enable DST and you can edit the DST bias time, the DST start time, and end time.
Click Save.
7.2 Set Network Information
7.2.1 Network Parameters Settings
Set device network parameters, including the NIC type, DHCP, and HTTP.
On the Device for Management page, click → Network → Network Parameters to enter the
Network Parameters Settings tab.
NIC Type
Select a NIC type from the drop-down list. You can select either Self-adaptive, 10M, or 100M.
DHCP
If you disable the function, you should manually set the device's IPv4 address, IPv4 subnet mask,
IPv4 default gateway, MTU, and port.
If you enable the function, the system will automatically assign IPv4 address, IPv4 subnet mask,
IPv4 default gateway for the device.
HTTP
Set the HTTP port, DNS1 server address, and DNS2 server address.
7.2.2 Network Center Parameters Settings
You can set the notify surveillance center, center's IP address, the port No., the protocol (EHome),
the EHome account user name,etc. to transmit data via EHome protocol.
On the Device for Management page, click → Network → Network Center Parameters to
enter the Network Center Parameters Settings tab.
Select a center from the drop-down list.
After enabling the function, you can set the center's address type, IP address/domain name, port
Loading ...
Loading ...
Loading ...