Hikvision DS-K1A8503F-B User Manual

Loading ...

DS-K1A8503 Series Fingerprint Time Attendance Terminal User Manual

3. Press ESC and save the attendance mode.

4. Move the cursor and select Shortcut Key and define the shortcut key's attendance status.

5. Press ESC and save the settings.

Result

Press a key on the keypad to select an attendance status and authenticate. The authentication will

be marked as the configured attendance status according to the defined shortcut key.

Or when you authenticate on the initial page, you will enter the Select Status page. Select a status

to take attendance.

Note

If you do not select a status for about 20 s, the authentication will be failed and it will not be

marked as a valid attendance.

5.6.3 Set Manual and Auto Attendance

Set the attendance mode as manual and auto and the system will auto change the attendance

status according to the configured parameters. At the same time you can manually change the

attendance status before the authentication.

Before You Start

Add at least one person, and set the person's authentication mode. For details, see Person

Management.

Steps

1. Move the cursor and select System → Att. Status to enter the Attendance Status page.

2. Move the cursor and select Attendance Mode and set the attendance mode as Manual and

Auto.

Figure 5-6 Manual and Auto Mode

Loading ...

Hikvision DS-K1A8503F-B K1A8503 Value Series Fingerprint Time Attendance Terminal