Hikvision DS-2TD2117-10/PAI User Manual

Loading ...

Before You Start

Go to Conguraon → System → Maintenance → VCA Resource Type , select Temperature

Measurement + Perimeter Protecon.

Steps

Go to

Conguraon → Perimeter Protecon → Rule .

Check Intelligent Analysis.

Oponal: Check Enable Fusion to view opcal and thermal image.

Set perimeter protecon rules.

1) Click

to add a new rule.

2) Enter the rule name, and click the drop down menu to select Rule Type.

Line Crossing

If any target moves across the seng line, the alarm will be triggered. You can set the

crossing

direcon.

Intrusion

If any target intrudes into the pre-dened region longer than the set duraon, the alarm

will be triggered.

Region Entrance

If any target enters the pre-dened region, the alarm will be triggered.

Region Exing

If any target exits the pre-dened region, the alarm will be triggered.

3) Draw the

detecon rule.

Table 7-1

Congure VCA Rules

Rule Type How to Draw and What Parameters to Set

Line

Crossing

a. Click to draw a line in the live view.

b. You can drag end points of the line to adjust the posion and length.

c. Set the crossing direcon. Bidireconal, A-to-B, or B-to-A are selectable.

d. Set

Sensivity. The higher the value is, the easier the target can be

detected.

Intrusion a. Click to draw an area in the live view. Right click the mouse to nish

drawing. It is recommended to draw three dierent areas covering the

whole detecon scene from near to far.

Thermal Network Camera User Manual

Loading ...

Hikvision DS-2TD2117-10/PAI Thermal Network Bullet Camera