Hikvision DS-2TD2117-10/PAI User Manual

Loading ...

3.3.2 Set Manual Port Mapping

Steps

Check Enable UPnP™, and choose a friendly name for the device, or you can use the default

name.

Select the port mapping mode to Manual, and set the external port to be the same as the

internal port.

Click Save.

What to do next

Go to the router port mapping

sengs interface and set the port number and IP address to be the

same as those on the device. For more

informaon, refer to the router user manual.

3.4

Mulcast

Mulcast is group communicaon where data transmission is addressed to a group of desnaon

devices simultaneously. Aer seng mulcast, you can send the source data eciently to mulple

receivers.

Go to

Conguraon → Network → Basic Sengs → Mulcast for the mulcast sengs.

IP Address

It stands for the address of mulcast host.

Stream Type

The stream type as the

mulcast source.

Video Port

The video port of the selected stream.

Audio Port

The audio port of the selected stream.

Note

Audio Port varies according to dierent camera models.

3.5 SNMP

You can set the SNMP network management protocol to get the alarm event and excepon

messages in network transmission.

Before You Start

Before seng the SNMP, you should download the SNMP soware and manage to receive the

device informaon via SNMP port.

Thermal Network Camera User Manual

Loading ...

Hikvision DS-2TD2117-10/PAI Thermal Network Bullet Camera