Hikvision DS-2TD2117-10/PAI User Manual

Loading ...

Chapter 2 Device Acvaon and Accessing

To protect the security and privacy of the user account and data, you should set a login password

acvate the device when access the device via network.

Note

Refer to the user manual of the soware client for the detailed informaon about the client

soware acvaon.

2.1 Acvate Device

The device needs to be acvated by seng a strong password before use. This part introduces

acvaon using dierent client tools.

2.1.1

Acvate the Device via Browser

You can access and acvate the device via the browser.

Steps

Connect your computer to the same Wi-Fi network that the device is in.

Change the IP address of the computer and device to the same segment.

Note

The default IP address of the device is 192.168.1.64. You can set the IP address of the computer

from 192.168.1.2 to 192.168.1.253 (except 192.168.1.64). For example, you can set the IP

address of the PC to 192.168.1.100.

Input 192.168.1.64 in the browser.

Set device

acvaon password.

Cauon

We highly recommend you create a strong password of your own choosing (using a minimum of

8 characters, including at least three of the following categories: upper case leers, lower case

leers, numbers, and special characters) in order to increase the security of your product. And

we recommend you reset your password regularly, especially in the high security system,

reseng the password monthly or weekly can beer protect your product.

Click OK.

Input the

acvaon password to log in to the device.

Oponal: Go to Conguraon → Network → Basic → TCP/IP to change the IP address of the

device to the same segment of your network.

Thermal Network Camera User Manual

Loading ...

Hikvision DS-2TD2117-10/PAI Thermal Network Bullet Camera