Loading ...
Loading ...
Loading ...
2N TELEKOMUNIKACE a.s., www.2n.cz 209/233
3.2 Intercom Control as Viewed by External
User
Quick Dial Buttons
Press the quick dial button on the main unit to dial the first position in the phone
directory (Phone Book) depending on the model type. Use extending modules to
extend the number of quick dial buttons to up to 146.
By pressing the quick dial buttons you dial the phone numbers assigned to the
particular Phone Book position. Call setup is signalled by a long intermittent or any
other tone depending on the configuration of the PBX connected.
Repeated pressing of one and the same quick dial button during call setup may
initiate call hangup or call termination plus dialling the next phone number of the
called subscriber, or may be assigned no function; refer to the Intercom Configuration
/ Hardware / Keypad subsection of Configuration Manual.
You can also press the button anytime to hang up if enabled so in the Button
parameter; refer to the Intercom Configuration / Hardware / Function During Call
Keypad subsection of Configuration Manual.
Calling to Phone Book Position
The Phone Book can contain up to 1999 programmable positions. The 2N LTE Verso
®
quick dial buttons can only be used for positions 1 through 146, depending on the
number of actually installed buttons. You can dial the other positions using the
numeric keypad if the function is enabled; refer to the Dial by Numeric Keypad
Intercom Configuration / Hardware / Keypad subsection of Configuration Manual.
Procedure:
Enter the position number using the numeric keypad (05, 15, 200, e.g. – two
digits at least and four digits at most) and press the button for confirmation.
You can also press the button anytime to hang up if enabled so in the Button
parameter; refer to the Intercom Configuration / Hardware Function During Call
/ Keypad subsection of Configuration Manual.
Loading ...
Loading ...
Loading ...