Loading ...
Loading ...
Loading ...
2N TELEKOMUNIKACE a.s., www.2n.cz 169/233
1.
2.
3.
4.
Version C – Additional Columns
Unscrew the cover of the additional bases and take it out with a flat screwdriver.
Insert the bases into each other as projected and secure their position with the
small side wedges and screws.
Place the cover on the flush mounting box / predrilled holes with dowels and pull
the cables if any through the bottom holes.
Pull the bus using the cable bushing available in the flush mounting box.
Main Unit
LTE Mobile Connection
Insert a PIN-less NanoSIM card (HW version 4 or higher) or MicroSIM (HW version 3
and lower) card with an active data service. The SIM card is not included in the
package, so use data services of your preferred LTE provider (the device requires the
4G/LTE technology and cannot be operated in 2G or 3G networks). Connect the
antenna provided stuck to the inner blind side. Use an external antenna when
mounting another module in the blind position (Part No. 9155048).
Vkládání SIM karty
How to insert a SIM card
HW version 4 and higher
Insert a NanoSIM card in the SIM slot and push it gently to fit it into
position. Repush the card gently to release and partially slide out
the card. Now remove the card.
HW version 3 and lower
Insert a MicroSIM card in the SIM slot. Remove the card in the same
way.
Power Supply Connection
2N LTE Verso
®
is powered from an external 12 V / 2 A DC source.
Loading ...
Loading ...
Loading ...