Loading ...
Loading ...
Loading ...
28
maintenance schedule
The following maintenance schedule is a guideline.
Maintenance and repairs should be performed more frequently where required by water quality,
equipment usage and local hygiene regulations.
FREQUENCY
DAILY
MONTHLY
6 Months
Annually
Bearing and mechanical seal maintenance must be performed by a qualified service technicial
annually
o
TASK
Clean with neutral cleaner / rinse thoroughly
Check dressure drop / change as needed
Wipe down with clean soft cloth. Use neutral cleaner
on damp cloth to remove oils or dirt. Clean any chlorine
rust stains using a non-abrasive cleanser.
Wipe clean with a clean cloth and warm water
inner door and
ice spout
Clean and sanitize according to the instructions in this
manual.
Wipe down with clean cloth and warm water
.
Check that it is kept clean
Check for leaks around seal
Always replace O-Ring if bolt is removed
Close water supply valve and drain water
Check water hose, clean as necessary
Inspect and clean with brush and vacuum, if dust adhesion
is severe, spray with pin cleaning agent, rinse and dry
Inspect for oil marks, loose components and wire
AREA
Scoop
Water filter
Exterior of unit
Storage bin
inner door and
Ice spout
Ice maker and
Storage bin
Evaporator
Condensate Drain
and Gear Motor
Drain Pan.
Ice maker and
reservoir
Ice exit fixing bolt
Water supply valve
and Drain Valve
Water Hose
Condenser
Ice maker
Loading ...
Loading ...
Loading ...