Loading ...
Loading ...
Loading ...
16
installing the door panel
The panel is held in place by self tapping screws and/or machine screws.
To install your panel, follow these simple steps:
1. First prepare your custom panel.
The panel must be 14-7/8” wide and no more than 3/4” thick. It cannot weigh more than 20 lbs.
The height of the panel can vary but cannot block the free exchange of air through the toekick.
If you are using one of the optional Stainless Steel door panels (XOUIMN15S or XOUIMN15ADA)
it is ready to install out of the box, simply peel off the protective layer of plastic before installing.
2. If your cabinetry uses a handle, locate and attach it before mounting the panel. Remember to
recess the screw heads.
2. If installing a custom panel, clamp the panel in position on the open door being careful not to
damage the panel or door liner. Use the 14 self tapping screws provided to secure the panel
as outlined on the exploded diagram shown on the next page. Check the screw depth if your
panel is less than 3/4” thick to ensure the screw points do not protrude through the panel.
If using one of the optional Stainless Steel door panels, using the machine screws provided,
secure the panel with the 14 machine screws supplied as outlined on the exploded diagram
shown on the next page.
3. Install Hole Covers as required and remove the clamps.
Loading ...
Loading ...
Loading ...