Loading ...
Loading ...
Loading ...
reversing the door
Your XO Ice Maker is shipped with the hinge on the right hand side but it can be easily reversed.
1. Remove the inner most screw holding the top
and bottom hinges (shown here)
2. Loosen the outer screw holding the top and
bottom hinges (as show here)
3. Slide the door and hinges sideways to remove
from the cabinet.
6. Remove the two hinges, rotate them 180 and screw them into place on the left hand side
where the Hinge
Pocket Covers were just removed.
7. Rotate the Hinge Pocket Covers 180 and install them to cover the right hand hinge location.
8. Use the Hole Plugs to hide the screws holding the Hinge Pocket Covers in place.
9. Move the outer screws loosen in Step 2 to the corrosponding hole on th eleft hand side of the
cabinet but do not tihten down yet.
10. Place the door onto the screws installed in Step 9 and side in toward the center of the cabinet
so that second screwhole is visible.
11. Install the screws removed in Step 1. Make certain the door is centered properly and tighten
all four (4) hinge screws.
15
4. On the opposing side of the door, remove the Hole Plugs
and screws from the left hand hinge locations.
5. Remove the
Hinge Pocket Covers from the left hand hinge
locations.
Hinge Pocket Cover
Hole Plugs
Loading ...
Loading ...
Loading ...