Loading ...
Loading ...
Loading ...
Cleaning and maintenance
61
EN
4.3 Cleaning the oven cavity
In order to keep your oven in the best
possible condition, clean it regularly after
letting it cool down.
Avoid letting food residue dry inside the
oven cavity, as this could damage the
enamel.
Take out all removable parts before
cleaning.
For easier cleaning, we recommend
removing:
• the door;
• the rack/tray support frames;
• removable guides, where fitted;
Removing racks/trays support frames
Removing the rack/tray support frames
enables the sides to be cleaned more
easily.
To remove the rack/tray support frames:
• Pull the frame towards the inside of the
oven to unhook it from its groove A, then
slide it out of the seats B at the back.
• When cleaning is complete, repeat the
above procedures to put the rack/tray
support frames back in.
Manual deactivation of the door lock
lever
The door lock lever is located in the first slot
on the left under the control panel, in the
upper part of the front of the oven.
During normal cleaning operations, it is
possible to accidentally activate the door
lock lever.
Door lock lever activated
If you are using specific cleaning
products, we recommend running
the appliance at maximum
temperature for 15-20 minutes in
order to eliminate any residue.
Improper use
Danger of burns
• The following operations must always
be performed with the appliance cold
and switched off.
• Never attempt to manually deactivate
the door lock lever during a pyrolytic
cycle.
Loading ...
Loading ...
Loading ...