Membrane Solutions MS18 Air Purifier for Home Large Room User Manual

Who we are

Membrane Solutions

is a puri�ication brand from the United States,

focusing on engineering �iltration and advanced puri�ication technology.

Membrane Solutions

promotes the philosophy of a minimalist

lifestyle, returning to nature with clean water and fresh air.

Membrane Solutions

design product's to be both smart, easy to

operate, and practical in appearance and functionality.

If you require technical assistance, please contact our support engineers,

who will be pleased to assist you.

4530 B STREET NW #A, AUBURN WA 98001, USA

Phone: +1-866-528-4572

Email: [email protected]

MS18 Air Puri�ier

Please retain owner's manual for future reference

Website: www.mspurelife.com

Membrane Solutions

MS18 Air Puri�ier

Operator and Maintenance Handbook

Warranty

Membrane Solutions

warrants to the customer that its residential air

puri�iers will be free from defects in material and workmanship under

normal use and service for a period of 1 year. We will replace or repair

any part of the Membrane Solutions

air puri�ier that we �ind to be

defective in operation due to faulty materials or workmanship within

one year since the date of the original purchase. Used replaceable �ilter

cartridges are excluded.

General

Conditions

Membrane Solutions

obligation to the customer under these warranties

shall be limited, at its option, to replacement or repair of items covered

by these warranties. Prior to return or repair of covered items, the

customer must obtain a return goods authorization number from

Membrane Solutions

and, at Membrane Solutions

option, return the

item with freight prepaid by the customer.

Damage to any part of this system because of misuse, misapplication,

negligence, alteration, accident, installation, or operation contrary to

our instructions, this warranty does not cover incompatibility with

accessories not installed by Membrane Solutions

, or damage caused

by freezing,�lood, �ire, or Acts of God. In all such cases, regular charges

will apply.This limited warranty does not include service to diagnose a

claimed malfunction in this unit. This warranty is void if the claimer is

not the original purchaser of the unit or if the unit is not operated

under normal operating conditions. We assume no warranty liability

in connection with this system other than that speci�ied herein.

This warranty is in lieu of all other warranties, expressed or implied,

including warranties of �itness for a particular purpose.

Membrane Solutions

liability hereunder shall not exceed the cost

of the product. Under no circumstances will Membrane Solutions

be liable for any incidental or consequential damages or for any other

loss, damage or expense of any kind, including loss of use,arising in

connection with the installation or use or inability to use the covered

items. These warranties are governed by the laws of the state of

Washington, USA, and may change at any time without notice.

Table of Contents

Overview ......................................................................................................................

Getting Started ........................................................................................................... 2

Introduction ...........................................................................................................

Warning and Caution..........................................................................................

Operating Guidelines ......................................................................................... 4

Installation Guide ..................................................................................................... 5

System Contents...................................................................................................

Commissioning the system.............................................................................

Operating and Maintenance ................................................................................

Power Button ........................................................................................................ 7

Fan Speed ................................................................................................................ 7

Sleep Mode ............................................................................................................ 8

Timer ...........................................................................................................................

Filter Reset ............................................................................................................. 8

Filter Replacement .............................................................................................. 9

Troubleshooting Guide .................................................................................. 10

Warranty .............................................................................................................. 12

Troubleshooting Guide

Problem

Possible Solution

The �ilter indicator

lamp is on

The air �ilter is 100% exhausted and

requires replacement (see page 9)

Only the sleep

indicator light is

on, yet the puri�ier

is still operating.

The air puri�ier is in sleep mode, push the

fan speed button to change the

operation mode, indicator lights will turn

on again.

If your problem is

not listed

Please contact Membrane Solutions

Customer Service

Night Light ..............................................................................................................8

Overview

Getting Started

Introduction

System features

Membrane Solutions

contact details

Warning & Caution

Operating Guidelines

Installation Guide

System Contents

Start-up

Turning on the Puri�ier

Operating Guide

Mode Selection

Filter Replacement

Troubleshooting Guide

Warranty

Troubleshooting Guide

Problem

Possible Solution

The air puri�ier

will not turn on or

respond to the

power button

Plug the air puri�ier into an electrical

outlet and make sure the outlet is

switched on (if applicable).

Plug the air puri�ier power plug into a

different electrical outlet.

Air�low is

signi�icantly

reduced

Press the fan button to increase fan speed

The �ilter may be blocked, replace the air

�ilter

Air Puri�ier makes

unusual noise

while the fan is on

Make sure the air puri�ier is being

operated on a hard-�lat even surface

The �ilter may be blocked, replace the air

�ilter

The air puri�ier may be damaged

contacted customer support

Unpleasant or

mustysmell coming

from the puri�ier

Do not use in a damp or wet environment,

If air �ilter becomes damp, replace the

�ilter and move the air puri�ier to a dry

area

The carbon component of the �ilter may be

exhausted, replace the air �ilter.

Poor air

puri�ication quality

Press the fan button to increase fan

speed

Close doors and windows while using the

air puri�ier

Make sure the air �ilter is removed from its

packaging. (see page 9)

Make sure the air �ilter is removed from its

packaging. (see page 9)

Replace the �ilter

Getting Started

Introduction

Thank you for purchasing the Membrane Solutions

MS18 Air Puri�ier.

Please contact us for the latest product information, including operator

manuals, videos, support materials, and where to purchase items.

The MS18 is a durable piece of equipment,with

proper care it will last for many years.This

owner's handbook outlines the installation,

operation, and maintenance requirements to

sustain perfect product performance.

The MS18 features a Primary Filter

and High-Ef�iciency Particulate Air

Filter (HEPA), capturing particles with a

diameter greater than or equal to 0.3 microns.

Website: www.mspurelife.com

Customer Service: [email protected]

Toll-Free Phone: 1-866-528-4572

The MS18 can �ilter out impurities and particles in the air, such as, dust,

pollen, cigarette smoke, pet dander, off-odors, and unhealthy vapors.

Step 4

Place the new �ilter into the air puri�ier

making sure it is facing the correct direction.

Air�low travels from outside to the center of

the unit. Reinstall the rear cover

After replacing the �ilter, plug the power cord

back into an electrical outlet, then hold down

the �ilter button for 3 seconds to reset the �ilter

timer, the indicator light will go out showing the

reset was successful.(See Page 8).

Filter Replacement

Step 1

Press the power button to turn the air

puri�ier off, unplug the power cord from

the electrical outlet.

Remove the rear cover of the air puri�ier

and remove the exhausted composite �ilter

element.

Step 2

Clean out any remaining dust, dirt, or lint

inside the puri�ier using a vacuum hose or

dry cloth.

DO NOT use water or liquids to clean the

puri�ier.

Step 3

Remove any packing from the new �ilter

element and take notice of the inward and

outward sides of the �ilter element.

Refer to the new �ilter instructions for the

direction of air�low.

Warning & Caution

Membrane Solutions

products are designed with safety in mind. However,

personnel using this device must be familiar with any potential dangers. All

safety information detailed in this handbook should be reviewed before

installing and operating this air puri�ier.

This product is not a toy; children must be supervised when

using the device. Keep packing materials out of children's reach.

The system has been designed for indoor use only. Install the air

puri�ier out of direct sunlight on a �lat, level dry, and secure

surface with average ambient room temperature.

Do not touch the power plug with wet hands. Do not use if plug

and/or power cord is damaged or the product is not working.

Do not use the device in a place with heavy moisture or smoke.

Please keep the device away from �lammable gas appliances

such as heaters or �ireplaces.

Clean the device

and remove any dust from the power plug

regularly. Unplug the unit when cleaning, do not use strong

corrosive detergents of chemicals as they may damage the

surface of the device.

Do not obstruct the air inlets or outlets on the device. Do not

wash or reuse the composite �ilter – Replace it with a new �ilter.

Warnings! and Cautions! are provided; Failing to observe

these instructions could result in damage to the equipment,

associated parts, surroundings, or personal injury.

Sleep Mode

Press the sleep button to put the unit into

Sleep Mode. In this mode the fan is at its

lowest/quietest setting. Also, only the Sleep

button is illuminated to help keep the room dark.

Timer

Press the timer button after power-on to set the

timed auto-off feature.Repeatedly press the

timer button to cycle through the preset

auto-off times of 2, 4 or 8 hours,the corresponding

indicator light will display the selected auto-off

time setting.

Filter Reset

When the total run hours of the air puri�ier reaches

1000hours, the indicator will light up to indicate

the �ilter needs to be replaced. After the replacement

is completed (see page 9), press and hold the �ilter

reset button for 3 seconds until the indicator light

is off, the �iltertimer function is now reset.

Night Light

Press the night light button to turn on the night

light.

Press the night light button a second time to

turn off the night light.

Actual lifespan of the �ilter may vary depending on the amount of dust,

smoke, humidity, and the concentration of other airborne particles and

vapors in the air.

Operating Guidelines

The following table lists the operating parameters for this product.

Operating this product outside these speci�ications may cause system

performance issues and may even lead to personal injury and void any

warranty. Please contact Membrane Solutions

for further advice and

support.

Operating Parameters

Model

Membrane Solutions

MS18

Rated Voltage

120 V ~ 60 Hz

Rated Power

75 Watts

Dimensions

9.4 x 7 x 20.2 Inches

(240 x 178 x 512 mm)

Operational weight

7.9 Ib (3.6 kg)

Filter Element type

A primary �ilter and a composite �ilter

Temperature & Humidity

Operating: 32-104℉ (0-40℃) 20-90%

Storage: 14-140℉ (-10-60℃) 20-90%

Operating Guide

Control Panel

Power

Button

Press the Power button to put air puri�ier

into operating mode.

Press the power button a second time to stop

the air puri�ier and place it into standby

mode.

Fan Speed

Press Fan button repeatedly to cycle through the

different speed settings.

1/Sleep – Low speed

2 – Medium speed

3 – High Speed

The corresponding fan speed indicator

light will display the current fan speed.

Installation guide

System Contents

Your Membrane Solutions

MS18 Air Puri�ier was carefully assembled,

packaged,and shipped complete with all the parts you should require.

Unsure about something? Is there a problem?

Please contact Membrane Solutions

via our service email

or toll-free number.

Customer Service: [email protected]

Toll-Free Phone: 1-866-528-4572

Commissioning the system

Step 1

Before using the air puri�ier for the �irst

time, open the rear cover and remove the

composite �ilter. Make sure to remove any

packaging from the �ilter element, or the

product will not function correctly.

Step 2

Plug the air puri�ier power plug into an

electrical outlet.

The puri�ier should now be in standby

mode.

Step 3

Push the power button once to turn the air

puri�ier on.

The puri�ier should now be in operating

mode.

5.Primary Filter

4.Air inlet grille

3.Lock

2.Composite Filter

1.Control panel

6.Air outlet grille

Installation guide

System Contents

Your Membrane Solutions

MS18 Air Puri�ier was carefully assembled,

packaged,and shipped complete with all the parts you should require.

Unsure about something? Is there a problem?

Please contact Membrane Solutions

via our service email

or toll-free number.

Customer Service: [email protected]

Toll-Free Phone: 1-866-528-4572

Commissioning the system

Step 1

Before using the air puri�ier for the �irst

time, open the rear cover and remove the

composite �ilter. Make sure to remove any

packaging from the �ilter element, or the

product will not function correctly.

Step 2

Plug the air puri�ier power plug into an

electrical outlet.

The puri�ier should now be in standby

mode.

Step 3

Push the power button once to turn the air

puri�ier on.

The puri�ier should now be in operating

mode.

5.Primary Filter

4.Air inlet grille

3.Lock

2.Composite Filter

1.Control panel

6.Air outlet grille

Operating Guidelines

The following table lists the operating parameters for this product.

Operating this product outside these speci�ications may cause system

performance issues and may even lead to personal injury and void any

warranty. Please contact Membrane Solutions

for further advice and

support.

Operating Parameters

Model

Membrane Solutions

MS18

Rated Voltage

120 V ~ 60 Hz

Rated Power

75 Watts

Dimensions

9.4 x 7 x 20.2 Inches

(240 x 178 x 512 mm)

Operational weight

7.9 Ib (3.6 kg)

Filter Element type

A primary �ilter and a composite �ilter

Temperature & Humidity

Operating: 32-104℉ (0-40℃) 20-90%

Storage: 14-140℉ (-10-60℃) 20-90%

Operating Guide

Control Panel

Power

Button

Press the Power button to put air puri�ier

into operating mode.

Press the power button a second time to stop

the air puri�ier and place it into standby

mode.

Fan Speed

Press Fan button repeatedly to cycle through the

different speed settings.

1/Sleep – Low speed

2 – Medium speed

3 – High Speed

The corresponding fan speed indicator

light will display the current fan speed.

Warning & Caution

Membrane Solutions

products are designed with safety in mind. However,

personnel using this device must be familiar with any potential dangers. All

safety information detailed in this handbook should be reviewed before

installing and operating this air puri�ier.

This product is not a toy; children must be supervised when

using the device. Keep packing materials out of children's reach.

The system has been designed for indoor use only. Install the air

puri�ier out of direct sunlight on a �lat, level dry, and secure

surface with average ambient room temperature.

Do not touch the power plug with wet hands. Do not use if plug

and/or power cord is damaged or the product is not working.

Do not use the device in a place with heavy moisture or smoke.

Please keep the device away from �lammable gas appliances

such as heaters or �ireplaces.

Clean the device

and remove any dust from the power plug

regularly. Unplug the unit when cleaning, do not use strong

corrosive detergents of chemicals as they may damage the

surface of the device.

Do not obstruct the air inlets or outlets on the device. Do not

wash or reuse the composite �ilter – Replace it with a new �ilter.

Warnings! and Cautions! are provided; Failing to observe

these instructions could result in damage to the equipment,

associated parts, surroundings, or personal injury.

Sleep Mode

Press the sleep button to put the unit into

Sleep Mode. In this mode the fan is at its

lowest/quietest setting. Also, only the Sleep

button is illuminated to help keep the room dark.

Timer

Press the timer button after power-on to set the

timed auto-off feature.Repeatedly press the

timer button to cycle through the preset

auto-off times of 2, 4 or 8 hours,the corresponding

indicator light will display the selected auto-off

time setting.

Filter Reset

When the total run hours of the air puri�ier reaches

1000hours, the indicator will light up to indicate

the �ilter needs to be replaced. After the replacement

is completed (see page 9), press and hold the �ilter

reset button for 3 seconds until the indicator light

is off, the �iltertimer function is now reset.

Night Light

Press the night light button to turn on the night

light.

Press the night light button a second time to

turn off the night light.

Actual lifespan of the �ilter may vary depending on the amount of dust,

smoke, humidity, and the concentration of other airborne particles and

vapors in the air.

Getting Started

Introduction

Thank you for purchasing the Membrane Solutions

MS18 Air Puri�ier.

Please contact us for the latest product information, including operator

manuals, videos, support materials, and where to purchase items.

The MS18 is a durable piece of equipment,with

proper care it will last for many years.This

owner's handbook outlines the installation,

operation, and maintenance requirements to

sustain perfect product performance.

The MS18 features a Primary Filter

and High-Ef�iciency Particulate Air

Filter (HEPA), capturing particles with a

diameter greater than or equal to 0.3 microns.

Website: www.mspurelife.com

Customer Service: [email protected]

Toll-Free Phone: 1-866-528-4572

The MS18 can �ilter out impurities and particles in the air, such as, dust,

pollen, cigarette smoke, pet dander, off-odors, and unhealthy vapors.

Step 4

Place the new �ilter into the air puri�ier

making sure it is facing the correct direction.

Air�low travels from outside to the center of

the unit. Reinstall the rear cover

After replacing the �ilter, plug the power cord

back into an electrical outlet, then hold down

the �ilter button for 3 seconds to reset the �ilter

timer, the indicator light will go out showing the

reset was successful.(See Page 8).

Filter Replacement

Step 1

Press the power button to turn the air

puri�ier off, unplug the power cord from

the electrical outlet.

Remove the rear cover of the air puri�ier

and remove the exhausted composite �ilter

element.

Step 2

Clean out any remaining dust, dirt, or lint

inside the puri�ier using a vacuum hose or

dry cloth.

DO NOT use water or liquids to clean the

puri�ier.

Step 3

Remove any packing from the new �ilter

element and take notice of the inward and

outward sides of the �ilter element.

Refer to the new �ilter instructions for the

direction of air�low.

Overview

Getting Started

Introduction

System features

Membrane Solutions

contact details

Warning & Caution

Operating Guidelines

Installation Guide

System Contents

Start-up

Turning on the Puri�ier

Operating Guide

Mode Selection

Filter Replacement

Troubleshooting Guide

Warranty

Troubleshooting Guide

Problem

Possible Solution

The air puri�ier

will not turn on or

respond to the

power button

Plug the air puri�ier into an electrical

outlet and make sure the outlet is

switched on (if applicable).

Plug the air puri�ier power plug into a

different electrical outlet.

Air�low is

signi�icantly

reduced

Press the fan button to increase fan speed

The �ilter may be blocked, replace the air

�ilter

Air Puri�ier makes

unusual noise

while the fan is on

Make sure the air puri�ier is being

operated on a hard-�lat even surface

The �ilter may be blocked, replace the air

�ilter

The air puri�ier may be damaged

contacted customer support

Unpleasant or

mustysmell coming

from the puri�ier

Do not use in a damp or wet environment,

If air �ilter becomes damp, replace the

�ilter and move the air puri�ier to a dry

area

The carbon component of the �ilter may be

exhausted, replace the air �ilter.

Poor air

puri�ication quality

Press the fan button to increase fan

speed

Close doors and windows while using the

air puri�ier

Make sure the air �ilter is removed from its

packaging. (see page 9)

Make sure the air �ilter is removed from its

packaging. (see page 9)

Replace the �ilter