COSTWAY EP23760 12 H Timer LED Remote Control Portable User Manual

HEATER

INFRARED QUARTZ

EP23760

TABLE OF CONTENTS

Package c口ntents ............................................................... 3

Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ... 4

Frequently Asked Questions ..•...•......•.•.•....•.......••........•..•.•...•.... 6

Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Troubleshooting . . . . . . • . . . . . . . • . . . . . . • . . . . . . . • . . . . . . . • . . . . . . • . . . . . . . • .... 8

Control Panel. .•............•............•.•............•............•.•........ 9

Remote Control.………………………………………………………10

Operating Instructions .

. . . . . . . • . . . . . . • . . . . . . . • . . . . . . . • . . . . . . • . . . . . . . • ... 11

Ca「理andMaintenance .......................................................... 13

One-Year Limited Warran ...................................................... 14

Replacement Parts List

. . . . . . . • . . . . . . • . . . . . . . • . . . . . . . • . . . . . . • . . . . . . . • ... 15

REPCEMENT PARLIST

Fo「「eplacement pa同s ,call our technical suppo depament at 657-3 41-0362，’a.m. -5 p.m., PST,

Monday-F「iday

PART

。

o::

固！

＠

u咀

。

DCRIPTION PART#

Control Board

04.01.3.001

Fan

04.04. 1 .001

Powe「Board

04.01.1.001

Manual Reset Limit Sensor

04.04.1 .009

Limit Switch

04.04.1 .004

Master Power Switch 04.04. 1 .003

Qua「tzHeating Element 04.04. 1 .018

Temperature Sensore

04.03.1 .001

Remote Control

04.01.2.001

』ιι

。。

』U

旷�

ONE-R LIMITED RRAN

The manufacture「wa「rantsthis heater against defects in mate「ialsand workmanship口n functional parts,

for a period of 1 year from the o「iginal date of

�

u陀hase. Yo「salesreceipt showing the date of purchase of

the product is your proof of purchase. Keep it in a safe place for future reference. This wa「「anty is subject

to pe陌onal use only, comme『ial or rental applications will not be covered.

This pduct is made with the highest quality mate「ialsand is warranted to be free from defects

in materials and wo「kmanshipat the time of

u陀hase.This limited warranty applies to

roducts

manufactured o「dist「ibutedby the manufacturer，自陀deliver哩din the continental United States o「

Canada and extends to the口riginalpurchase「．。rgift recipient. This warranty becomes valid at the time

of pu陀haseand terminates eithe「by the specified time frame listed above and/or口wner transfer. Any

「efundsor moneta compensations must be claimed through the place of pu陀hase(retaile「J,and

not through the manufacture Any extended war「anties(wa「「antiesthat cove「aboveand beyond this

manufacturerwa「ranty] that a sold through a retaile「or third pa「ty,are not directly co「「elatedwith this

products' limited warranty, and may be 「edirectedto said retailer o「 thi时pafo「 coverage.

This wa「「antyextends through the manufacturer。fthe product, and covers functional pa时sonly.

Cosmetics are not covered, unless unequivocally dete「minedit is a wo「kmanship defect. Shipping damage

sh口uldbe add「-essedwith the shipping c口mpany，『-etaile「．口rplace of puhase, not the manufacture「

unless the manufactu陀「wasthe direct shipper.

The manufacture「

＇

ssole obligati口nunde「thiswa「rantyshall be Limited to f「nishing the o「iginalpuπhase「

replacement pas for units deemed repairable by the supplie「

＇

swa「「antydepament. The pu陀hase「

is responsible fo「insu「ingany parts shipped o「陀turned,if desired. The purchase「isresponsible t口

prepay any shipping cha『，es (both ways] including, but not limited to taxes and duties. All exchanged pa『ts

and pducts replaced under this wa「ranwill become the propeyof manufactur. The anufacture「

resees the 「ightto change manufacturers。freplacement pas 口「 products f口「 use,in orde「to cove「

any existing wa「ran.

Thepu「chase「 may be asked to provide the supplier with proof of pu陀hase documents (including the date

of purchase] if requested. Any evidence of alteration, erasing，。「foeryof proof of purchase documents

will be just cause to VOID this limited warran. Products, in which the serial numbe「hasbeen defaced o「

「emovedare n口teligible fo「warranty coverage.

This wa「randoes not

app



if the unit has been subject to negligence, fab「ication,misuse, abuse, o「

repairs, alteration by non-manufacturer autho「izedpersonnel, inapprop「iate installations，。「anycase

beyond the control of the manufacturer. Examples of war「antyinvalidation may also include, but are not

limited to:

• Use of lacque「0「paints in (and around) the heaters

• Heate「 placedon non-app「oved su「faces

• Electrical requirement deficiencies (15-20 amp dedicated outlet

]

• Use on extension cords/timers/sue protectors/GFCI

• Outdoo「 applications

• No「alwea「／tea「／weathering

• Pet/consumer accidents

The anufactu 「 shallnot be liable for any loss due to use (or misuse] of the heate「0「otherincidental

O「 consequentialcosts, expense O「damageswithout irrefutable foundations. Unde「noci陀umstances

shall the manufacture「口「anyof its representatives be held liable for inju to any pe陌onor damage t口

any prope时y, however a「ising.Any implied wa「「anty shall have du「ationequal of the applicable warranty

stated above. Specifications a「esubject to change without notice o「 obligation.

This limited wa「ranty gives the口「iginal pu陀hase「 specificlegal rights. Othe「 rightsmay va『y from state

to state.

PACGE CONTENTS

�

PART DESCRIPTION QUANT门Y

Infrared Heater

Remote C口ntl

Control Panel (p「百assembled t口InfraredHeater (A

Ai「 Intake

Maste「Powe「Switch(pre assembled to Infra陀dHeate『·（Al

F Temperature Sens口r (pre assembled to Infrared Heate「!A

A SAFE INFORMATION

Please ad and unde国ndthis enti manual befo attempting to a坦mble,operate，。rinllthe pdu.

IMPORNT SAFETY INSTRUCTIONS

A RNING: POTENTIAL ELECTRICAL HARD IF NOT ADHERED TO. When using electrical appliances,

basic p陀cautionsshould always be followed to reduce the「iskof fire, elect「icshock, and inju to persons,

including the following:

•This heater must be plugged into a 120 V, 15 amp [or more) circuit of its own. Do not plug anything else

into the same ci「cuit. If unsure if you「home meets this specification, consult a certified elect「ician prio「

to use. Risk of fire, oeat!吨，malfu『1lon,ppe damage, lnJu, or e帽ndeath may result If

not adhed to!

•Connect to a properly grounded, 3-prong outl阜t only. Do not connect the heate「toextension cords,

SU咱eprotectors, timers, di「ectbreakers，。「 an口utletwith other appliances connected to the same

outlet. Risk of fi，”＇erheating, malfunion, prope damage, inju, or e四”deathmay sult if

not adhed to!

• This heater is hot when in use. To avoid burns, do not let bare skin touch hot su「faces.Use handles

[ce「tainmodels）口rwheels to move this heater.

•Keep combustible materials, such as furniture, pill口ws, bedding,

pape『

飞

clothes, and cuains at least 3

化（0.9 ml from the front of the heater and keep them away from the sides and rear of the heate

•Extreme cauti口nis necessa when any heate「is used by 口「nearchildren, invalids, pets，。「whenthe

heater is le仕operating unattended.

•Aays unplug the heater when not in use.

•Do not operate any heate「witha damaged co叫。「plugo「afte「theheate「malfunctions,has been

dropp时，ordamaged in any manner. Contact the manufacturer for陀solution options.

•Do not use outdoors. Exposu陀t口。utd口。「elementssuch as rain, snow, sun, wind，。rextreme

temperatures may cause the heate「to bee口me a safety hazard.

• This heater is not intended for use in bathrooms, laundry are筒，and si『nilarindoo「locations, nor any

locations that use GFCI outlets.

• Neve「place the heate「whereit may fall into a bathtub 口「口the「wate「receptacles.

• Do not run the co叫unde「 ca「pet.Do not cove「 the co叫withthrow rugs，「unners,or similar cove「ings.

Arrange the cord away from traic a陀asand where it will not be t「ipped ove

• The heate「mustbe plugged into a wall outlet that is a dedicated circuit with a minimum 15 amp rating

on that individual circuit.

• To disc口nnect the heater, first turn the power button to the OFF position and then remove the plug from

the wall outlet.

• Do not allow fo闹nobjects to enter o「blockany ventilation口「 exhaustopening as this may cause

electric shock, fi陀， O「damage the heater.

• Allow at least 3 ft. of un口bstructed space to the front and rea「of the heate「to allow for maximum heat,

ai「，andventilation flow.

• A heate「hashot and arcing o「spa「kingpasinside. Do not use it in areas where gasoline, paint, o「

flammable liquids a陀 used口「stored,nor use flammable solvents to clean the heate Keep the heate「

d「y at all times.

• Use this heater only as desc「ibed in this manual. Any othe「use not recommended by the manufacture「

may cause fire, electric shock，口「inju to persons.

• Do「1ot use ab「asives口entsto clean the heate「asit may cause damage to the finish o「casing.

• To pvent a possible fire, do not block air intakes o「exhaust in any manne Do not use on soft su「faces,

like a bed, whe「E口peningmay bee口me blocked.

• Always plug heate「sdirectly into a wall outlet/receptacle. Neve「 usewith an extension cord o「

「哩Locatable powe「tap (outlet/power strip).

SAVE THESE INSTRUCTIONS

CARE AND MAINTENANCE

ARNING：民fo「ep町formi『

unplug the unit, and allow it to cool completely.

1.To keep the heater clean, clean the oute「shellwith a so, damp cloth. Use a mild dete『-gentif

necessary. Afte「cleaning,dry the unit with a soft cloth.

CAUTION: DO NOT let liquid enter the heate

2.DO NOT use alcohol, gas口line,abrasive powde罔，furniture polish，。「roughbrushes to clean the

heater. This may cause damage or deterio「ationto the surface of the heate

3.DO NOT imme『百e the heate「in wate

4.it until the unit is c口mpletelydry before use.

5.If y口uwill not be using the heaterfo「a while, take the batte「ies out of the 「emotecontrol and sto陀

for future use.

6.St口陀theheate「ina cool, d location when n口tin use. To prevent dust and dirt build-up, use the

O「iginal packaging to pack the unit.

CLNING THE AIR FILTER

1.Clean the ai「filte「［2]afte「threemonths o「ifit appears to be blocking ai「flow. With the heate「

unplugged, remove the fou「filtersc阿ws[1) as illustrated below. Clean all pa巾。fthe filte「

assemb and allow pasto c口mpletelyd.

2.Reassemble and reinstall the filte「［2).

A WARNING: Do not use the heat川i川tthe filter a四mbly in place

�

自

Factory No HT1015

FREQUENTLY ASKED QUESTIONS

Please陀iewthese f陀quently asked questions on the next few pages prio「tousing you「heate

。.My heater emits a strange odor when I fit open the box and when I turn the hter on far the first

time. Why is this happening?

A. This is no「mal.This heater is t「回tedwith a specia L heat safe／「esistant coating. This odo「willsometimes

be present when the box is opened. When the coating is exposed to heat, it produces this paicula「口do「

du「ing the first few hou「s of ope「ation. This will dissipate a阮e「 thebreak-in

�

e「iod. lfyou are sensitive to

odo陪，y口umay want to pre-burn the unit in a garage with the doo「口penuntil the initial odo「 dissipates.

Q, If my heater runs on its max w画age setting, how many BTUs is that?

A. This heate「isintended to be used as supplemental heat in a「easmost needed. It may take several

minutes to several hou币toheat you「area, depending on va「iousfacto『·s.The below chaprovides BTU

translations for different wattages.

750

500

3,412

2,559

1,706

。.Can the heating elements be replaced?

A, Replacement heating elements can be obtained from the manufacture All pasmay be pu「hased

through the anufactu「if归urproduct is out of warran. If you feel that the elements are definitely

faulty right out of the box, contact Cust口me「Supp口时Arepresentative can then direct you to the next step.

。. Once I plug the unit in and turn it on, how long will it take to heat my room?

A, The heating process in the heate「beginsimmediately upon powe「ing口nand setting the desired

temperatu陀abovethe ambient temperatu陀.A noticeable change in the ambient temper百tureof the

room will vary due to variables such as the location of the heater (in the home), floor plan and size of the

「oom,how well the room is insulated, how many do口『·s/winds, how much ba陪concrete (acts as a heat

sink with any type of heating

)

the opening and closing of an exte「io「door,long hallways, high ceilings, etc.

Customers with smaller rooms expe「iencequick heat changes. Rooms with la『百erand open floor plans

can expect up to 24 hours to completely heat up.

。.I do not have a grounded outl创.n I use adapters, a 2-prong per strip, or remove the ground

prong fm the co?

A. NO! If you do not have a grounded outlet, contact a certified electrician for advice. Removing口「a忧e「ing

any pa「tof the heater's o「iginaldesign o「intent[including the power cor甘lwill void the warranty and

make you liable for any unexpected口「haza「dous sults.

。.My Heater has an ECO seing? How does this seing work?

A. The ECO mode on your heater is a program that attempts to keep the temperatu st「ictat a

“

wa「m"

F (20

C). This also helps with efficiency, as it is programmed to 1 I Inc「easethe powe「tothe unit

’

maximum wattage if the tempetu陀dpsbelow 64.4

F (18

。

Cl21 Gradually reduce the wattage used

as it approaches“2

。

（19

。

ClF and 3) Stop heating when 68

F (20

C) is achieved. This is c口nsideredan

Economical function, since in the ECO setting, the heate「is almost neve「running at the maximum watts.

负

OPERATING INSTRUCTIONS

1. Turn the heate「onor off by pressing the

Powe「buttonon the control panel (CJ o「 by

pressing the Power button on the remote

control (Bl.

Once the powe「isoff, heatin目elements

will stop wo「kingfirst. The fan will contim』e

working for up to 90 seconds to dispense

陌sidualheat inside the heate This is a

no「mal function.

Select a heat setting by p陀蚓ngthe HT

butt口non either the control panel (Cl or the

remote control (BJ to toggle between the

three heat settings.

Powe「forheat-up mode is 1,500 W; heat

down is 1,000 W. ECO mode is an Economic

Ene咱ySaving Function. When ECO mode is

chosen, the heate「will operate to maintain a

constant warm 68

。

Note: The ECO LED light will on illuminate

when the ECO function is active and the

ambient room temperature falls below

F / 20

3. Set the temperature by pssing the a「rows

on the control panel (Cl口「 the remote control

(Bl.

You can set the temperatu陀onthe heate「

anhere between 50

F and 90

F口rbetween

1日

。

cand 32

C. Once you have chosen the

desi陀dtemperatu陀，the heate「willremain

on until the room temperatu increases to

the temp

er百tureon the digital display. The

he ate「willcycle on and off to maintain the

desired room temperatu同．

To view the ambient temperatu「EP陀SSthe

ambient temperature button on the control

panel.

NEPssand hold the ambient tem阴阳tu障

button on the contl panel (CJ for 5 seconds

to switch the digital display indicato「口n the

heater been Fahnheit and Celsius.

On the mote,short p陀ssthe ambient

temperatu button to engage Ambient

Temperatu，longp陪ssfor 3 seconds to

engage Child Lock.

〔

。糕。

亡

。

＋

LOW



��







。

－

一

口

，

一

「

一

＋

一

＋

－

如

－

唱

－

＋

一

＋

－



REMOTE CONTROL

RT

NAME

Tem

p Up Button

Heater Mode Button

Temp Down Button

4 P口we「Button

Ambient/Lock Button

6 Timer Button

DESCRIPTION

Inc「easesthe set temperature value

ggles between Hi I Low/ Eco Modes

Dec「easesthe set temperature value

Powe陌the heater on o「0忏

Shows ambient temp/hold to engage o「 disengage safety lock

function

Engages the on/off time『

FREQUENTLY KED QUESTIONS

。.The temperatu on my heater does not match the temperatu display on my ll, or external

thermostat.啪”y?

A. This is c口mpletelyno「mal.The temperature display口nyou「heate「mayva from the temperature

display on another thermostat [like the one mounted to your wall or a puhasedexte「nalthe「mostat).

This is because the temperature sensor on the heate「 reads the temperatu directly around the heate

With the heate「nea「thec口ldflo口r[and heat rising). any readings on elevated o「externalthe「mostats

will differ in readings on the heate「.The best way to ope「a teyou「heateris to set the unit on High and dial

up to a temperature that feels comfo「tableto you. Then, leave it at that temperature，陀gardlessof the

mismatch. The heate「will cycle口 when the set temperature is met口「exceeded slightly.

。.n I use more tan one heater at a time? Can I use the heater and another appliance at the国me

time?

A. Yes, but make su陀theya re not plugged into the same circuit. Each heate「requiresits own minimum 15-

amp circuit with no other items plugged into that circuit or outlet. This is because heate are consider百d

appliances and draw口ut high amperage. If you are unsure your ciπuit meets these qirements,verify

with a ce「tified elect「ician.

A WARNING: Risk of fire, damage to prope句．。「 injurymay result if「equirements are not met.

。.Whydo眉myheates n ntinue to n aer the  temtu is ch or the r is tued o?

A. This is no「al.The heater

’

s fan will continue t口「uneven ae「theheater automatically cycles d口W.

The fan continues to run so that evelastbit of heat is blown out of the heat chamber while allowing the

unit to continue filte「ing you「air.Once the internal box/components cool completely, the fan should then

shut o付。n its 口wn. In this case, allow a few minutes afte「 theheat cycles off [with pe「口n]. The fan will

shut off faster when the power is turned off.

。.My heater's display shows my ambient tempeture to be in the 2Ds when I know it is warmer than

that. Wh

A.The heate「

’

sdispla

�

is defaulted to read the temperatu陀asFahrenheit. If you「heateris definitely

heating but shows it is in the 20s you probably have the setting to read your temperature in Celsius rathe「

than Fah「enheit.

。.My heater's power cord ge恒warm.My co is showing signs of heat or melting at the outlet. Is this

normal?

A.Awa「mpower co「d isno「mal. These pe「cordsare rated safe fo「up to 105

。

C/221

F by the UL, CSA,

O「l.The exception is, if you detect heat, smoke，。「 signsof melting at the contact point of the wall

outlet, it may be due to loose orw口「n wall contacts [or aing). Please stop using the heate「 immediately,

contact wa「ranty supp

ort fo「 areplacement powe「cord,and have a ce「tified electrician replace the wall

outlet as soon as possible.