Loading ...
Loading ...
Loading ...
19
Secure Dishwasher in Cabinet
Opening
46. Double-check dishwasher alignment in
cabinet opening
Check that dishwasher is still level front to back and side to
side in the cabinet opening.
Open dishwasher door and place towel over pump assembly
and spray arm of dishwasher. For some models, you may
have to remove lower dish rack. This will keep screws from
falling into pump area when you are securing dishwasher to
countertop or cabinet.
47. Secure dishwasher
A
A. Screw to side cabinet
Open dishwasher door to prepare for securing the
dishwasher to the countertop or side cabinet.
NOTES:
� The dishwasher must be secured to keep it from shifting
when the door is opened or closed.
� Do not drop screws into bottom of dishwasher.
� Locate brackets installed in the “Choose Anchor
Attachment Method” section, either on top or on the sides
of the dishwasher.
� If countertop anchoring: Secure dishwasher to the
countertop with two #10 x 1/2" Phillips-head screws
(included).
� If side anchoring: Drill pilot holes in cabinet to avoid
splitting the wood. Secure dishwasher to cabinet with two
#10 x 1/2" Phillips-head screws (included). Remove
upper rack for easier access.
48. Check door clearance
IMPORTANT: Check that top of door does not contact
screws, brackets, or countertop. If it does, adjust leveling
legs or use the side attachment option.
49. Check inner spacing
Open door and check that space between dishwasher
cabinet opening and tub is equal on both sides. If spacing is
not equal, loosen bracket screws and shift tub. Tighten
bracket screws.
Direct Wire Connection
50. Remove terminal box cover
Using a 1/4" hex-head socket, nut driver, or Torx
®
T20
®
screwdriver, remove terminal box cover. Retain for later use.
51. Install strain relief
Install a UL-listed/CSA-approved metallic strain relief.
Loading ...
Loading ...
Loading ...