Hikvision DS-2CD3666G2-IZS User Manual

Loading ...

Before You Start

●

Go to VCA and select the applicaon. Select Smart Event and click Next to enable the funcon.

●

For the device supporng HEOP, go to VCA to import and enable Smart Event.

Steps

Go to VCA → Set Applicaon → Smart Event → Region Exing Detecon .

Check Enable.

Click Add to add a rule and set a detecon area.

1) Draw a detecon area. Click , click on the live view to specify the vertexes and draw the

boundaries of the detecon area, and right click to complete drawing.

2) Set the minimum size and the maximum size for the target to improve detecon accuracy.

Only targets whose size are between the maximum size and the minimum size trigger the

detecon. Click and , then drag the mouse in the live view to draw the minimum and

maximum target size.

3) Oponal: Click to delete all the seng areas.

Set parameters.

Detecon Target

This funcon allows alarm triggering by specied selected target types. If the detecon target

is not selected, all the detected targets will be reported.

Note

This funcon is only available for certain device models under certain sengs. Please refer to

the actual sengs.

Sensivity

It stands for the percentage of the body part of an acceptable target that goes across the

predened region. Sensivity = 100 - S1/ST × 100. S1 stands for the target body part that goes

across the predened region. ST stands for the complete target body. The higher the value of

sensivity is, the more easily the alarm can be triggered.

Target Validity

If you set a higher validity, the required target features should be more obvious, and the

alarm accuracy would be higher. The target with less obvious features would be missing.

Network Camera User Manual

Loading ...

Hikvision DS-2CD3666G2-IZS 6 MP AcuSense Varifocal Bullet Network Camera