Hikvision DS-2CD3666G2-IZS User Manual

Loading ...

The metadata of face capture includes the rule informaon, target ID, target coordinate, me

informaon, etc. The camera detects the whole image by default. If the area is congured in the

face capture sengs, the camera detects the congured area.

10.3 Smart Event

Note

●

For certain device models, you need to enable the smart event funcon on VCA page rst to

show the funcon conguraon page.

●

The funcon varies according to dierent models.

10.3.1 Set Intrusion Detecon

It is used to detect objects entering and loitering in a predened virtual region. If it occurs, the

device can take linkage acons.

Before You Start

●

Go to VCA and select the applicaon. Select Smart Event and click Next to enable the funcon.

●

For the device supporng HEOP, go to VCA to import and enable Smart Event.

Steps

Go to VCA → Set Applicaon → Smart Event → Intrusion Detecon .

Check Enable.

Click Add to add a rule and set a detecon area.

1) Draw a detecon area. Click , click on the live view to specify the vertexes and draw the

boundaries of the detecon area, and right click to complete drawing.

2) Set the minimum size and the maximum size for the target to improve detecon accuracy.

Only targets whose size are between the maximum size and the minimum size trigger the

detecon. Click and , then drag the mouse in the live view to draw the minimum and

maximum target size.

3) Oponal: Click

to delete all the seng areas.

Set parameters.

Detecon Target

This funcon allows alarm triggering by specied selected target types. If the detecon target

is not selected, all the detected targets will be reported.

Note

This funcon is only available for certain device models under certain sengs. Please refer to

the actual sengs.

Threshold

Network Camera User Manual

Loading ...

Hikvision DS-2CD3666G2-IZS 6 MP AcuSense Varifocal Bullet Network Camera